Panasonic ToughBook CF-P2 Series Operating Instructions Manual

Also see for ToughBook CF-P2 Series: Operating instructions

62Dealing with ProblemsTroubleshootingStarting UpCheck to see if a fully charged battery pack is properlyinstalled.The power does not go on unless the Fast Travel Chargeris connected:The battery level is too low. Charge the battery with theFast Travel Charger. (Make sure that the battery neverdischarges completely and that it is charged periodically.)Push the reset switch to restart CF-P2.If the power does not turn on when the above operationsare performed, the battery pack must be replaced.You can set the date and time through [Clock &Alarms] in - [Settings] - [System] tab.If you continue to experience problems, the backupbattery maintaining the clock may need to be replaced.Contact Panasonic Technical Support.This computer will not correctly recognize the dateand time starting from the year 2085 A.D.The battery level may be too low. If the battery levelgoes below a certain threshold, CF-P2 automatically shutsdown. In such cases, connect the Fast Travel Chargerand charge the battery. (After the Fast Travel Charger isconnected to CF-P2, it may take a maximum of 20 min-utes before CF-P2 can be turned on.)The computer may have entered a locked state. If this isthe case, connect the Fast Travel Charger and push thereset switch. Check the remaining battery level and makesure that multiple applications are not running simulta-neously. Close all applications that are not being used.The computer may be turned off automatically when us-ing File Explorer. To prevent this, change the time set-ting to a longer time in - [Settings] - [System] tab -[Power] - [Advanced] tab.CF-P2 does not turn on.Or, there is no displaywhen CF-P2 is turned on.The date and time are in-correct.CF-P2 shuts down auto-matically.The data cannot be copied.The computer locks upduring the execution of anapplication, or the execu-tion speed becomes notice-ably slower.Application SoftwareConnect the Fast Travel Charger and push the resetswitch. Check the remaining battery level and make surethat multiple applications are not running simultaneously.Close all applications that are not being used.