Panasonic ToughBook CF-P2 Series Operating Instructions Manual

Also see for ToughBook CF-P2 Series: Operating instructions

61Performing a ResetThis selection saves all stored records and entries and then restartsthe computer.Unsaved data in open windows may be lost.If possible, turn off the computer and push the center of the resetswitch straight in.Push the reset switch within 1 second using the stylus.Resetting the computer may cause the clock to malfunction.After resetting the computer, check the time and correct the clocksettings if necessary.Performing a Full ResetThis selection erases all stored records except for Flash storage and entries and then restartsthe computer.Therefore, never perform a full reset unless a reset does not solve your problem.(1) Using the provided stylus ( page 17), push the center of the reset switch straight infor 1 second while holding down on the power switch ( page 12).(2) Tap the screen to set up your Pocket PC.The Windows alignment screen is displayed.(3) Align the touchscreen ( page 18 step2).(4) At [complete], tap the screen to begin using CF-P2.If the [Panasonic Backup] screen is displayed, follow the on-screen instructions.(5) Set the time and date.Tap - [Settings] - [System] tab - [Clock & Alarms] to set the time and date, and tap[ok].Resetting Your ComputerWhen the computer fails to respond to an operation, reset your computer. There are twomethods for resetting the computer.Dealing with ProblemsUse only the provided stylus to push in the reset switch.Do not push the reset switch with any other sharp-pointed objects, i.e. pencils, and ballpoint pens. The reset switch or other parts may become damaged.CAUTIONReset SwitchNOTEAfter resetting CF-P2, it takes maximum 30 seconds until CF-P2 can be used again.