17 Getting StartedNOTEz PC Information ViewerThis computer periodically records the management information of the hard disk, etc. The maximum data volume for eachrecord is 1024 bytes.This information is only used for estimating the cause in the case when the hard disk goes down by any possibility. Theyare never sent to outside via network nor used for any other purpose except for the purpose described the above.To disable the function, add the check mark for [Disable the automatic save function for management information history]in [Hard Disk Status] of PC Information Viewer, and click [OK].(Î Reference Manual “Checking the Computer’s Usage Status”) Precaution against Starting Up/Shutting Downz Do not do the followingy Connecting or disconnecting the AC adaptory Sliding the power switchy Touching the keyboard, touch pad, touchscreen (only for model with touchscreen), or external mousey Closing the displayy Turn on/off the wireless switchNOTEz To conserve power, the following power saving methods are set at the time of purchase.y The screen automatically turns off after 10 minutes of inactivity.y The computer automatically enters sleep *2 after 20 minutes of inactivity.*2 Refer to Reference Manual “Sleep and Hibernation Functions” about resuming from sleep. To change the partition structureYou can shrink a part of an existing partition to create unallocated disk space, from which you can create a new parti-tion. This computer has a single partition as default setting.A Click (Start) and right-click [Computer], then click [Manage].z A standard user needs to enter an administrator password.B Click [Disk Management].C Right-click the partition for Windows (“c” drive in the default setting), and click [Shrink Volume].z The partition size depends on the computer specifications.D Input the size in [Enter the amount of space to shrink in MB] and click [Shrink].z You cannot input a larger number than the displayed size.z To select [Reinstall to the first 3 partitions.] in reinstalling Windows 7 (Î page 22), 30000 MB or more is nec-essary for [Total size after shrink in MB].E Right-click [Unallocated] (the shrunk space in the step D) and click [New Simple Volume].F Follow the on-screen instructions to make the settings, and click [Finish].Wait until formatting is completed.NOTEz You can create an additional partition using remaining unallocated space or newly creating unallocated space.z To delete a partition, right-click the partition and click [Delete Volume] in step C.D Click [OK].z Perform the calibration for the orientation to be used.