Panasonic Toughbook CF-W4HCEZZBM Operating Instructions Manual

Also see for CF-W4 Series: Operating instructions Reference manual

51 Troubleshooting1 Connect the AC adaptor.Do not interrupt the reinstallation procedure before completion, for exampleby turning off the computer or pressing the Ctrl + Alt + Del key, as thismay prevent Windows from starting up, or may cause data to be lost so thatthe reinstallation procedure cannot be executed.2 Change the settings in the Setup Utility.Make the following settings.z Return settings to the status at the time of purchase.z Change settings to enable startup from DVD-ROM & CD-R/RW drive.If you change the settings from that at the time of purchase, we recommendthat you make a note of the settings that are changed.A Turn on the computer, and press the F2 key while [Panasonic] bootscreen is displayed.The Setup Utility will start up.z If the password has been set, enter the Supervisor Password, andpress the Enter key.B Press the F9 key.At the confirmation message, select [Yes] and press the Enter key.C Select the [Boot] menu, then select [USB CDD] and press the F6 key until[USB CDD] is at the top of [Boot priority order].D Place the Product Recovery DVD-ROM into the DVD-ROM & CD-R/RWdrive.z When the disk cover does not open:[CD/DVD Drive Power] has been set to [Off] in the [Main] menu. Per-form the following procedure.Press the F10 key. At the confirmation message, select [Yes] andpress the Enter key. (The computer will restart)Press the F2 key while [Panasonic] boot screen is displayed.Place the Product Recovery DVD-ROM, and execute step E.E Press the F10 key.At the confirmation message, select [Yes] and press the Enter key.The Setup Utility will close, and the computer will restart.z If the password has been set, enter the Supervisor Password, andpress the Enter key.3 Use the Product Recovery DVD-ROM to execute reinstalla-tion.A Press the 1 key to execute [1. [Recovery]].(All of the screens below are only examples.)Reinstalling