Panasonic Toughbook CF-W4HCEZZBM Operating Instructions Manual

Also see for CF-W4 Series: Operating instructions Reference manual

57 Important Information• Requires availability of at least half of the entire hard disk. Without sufficientspace available, the backup area cannot be created.• When the backup area is created, the usable hard disk capacity will bereduced to less than half.• The backup area cannot be accessed from Windows. For this reason, backedup data cannot be copied to CD-R or other removable disk media.• When the hard disk backup function is executed, data in the backup area willbe overwritten. If newly created or edited data is backed up later, data storedpreviously in the backup area will be lost.A Turn the computer on, and press the F2 key while [Panasonic] bootscreen is displayed.The Setup Utility will start up.If a password has been set, enter the Supervisor Password.You cannot register [Boot] menu with a User Password.B Select the [Boot] menu, then select [USB CDD] and press the F6 key until[USB CDD] is at the top of [Boot priority order].C Place the Product Recovery DVD-ROM into the DVD-ROM & CD-R/RWdrive.• When the disk cover does not open:[CD/DVD Drive Power] has been set to [Off] in the [Main] menu. Performthe following procedure.Set [CD/DVD Drive Power] to [On].Press the F10 key.At the confirmation message, select [Yes] and press the Enter key.The computer will restart.Press the F2 key while [Panasonic] boot screen is displayed.Place the Product Recovery DVD-ROM, and execute step D.D Press the F10 key.At the confirmation message, select [Yes] and press the Enter key.The computer will restart. If [Enter Password] is displayed during the fol-lowing procedures, input the Supervisor Password or the User Password.This screen should appear.E Press the 3 key to execute [3. [Backup]].CAUTIONz When dividing the hard disk into partitionsDo not execute [1. [Recovery]] to divide the hard disk into partitions. The harddisk backup function cannot be enabled after the hard disk has been partitioned.Use step G to divide the hard disk.F At the confirmation message, press the Y key.G Select how to divide the hard disk from the menu.the hard disk>Select [1].Create a Backup Area