Panasonic VDR-M70EG Service Manual

Also see for VDR-M50EB: Operating instructions Operating instructions

Panasonic VDR-M70EG Service Manual Manual pdf 102 page image

6.4.2. Video LevelPreparations:1) Connect the oscilloscope CH1 to video out.2) Switch the oscilloscope V-MODE to “CH1” andTRIGGER SOURCE to “CH1”.Procedure:1) Choose VIDEO LEVEL on the ADJUST MENU screen.2) Click the EXECUTE button on ADJUST MENU screento proceed with the VIDEO LEVEL ADJUSTMENTscreen.3) Click the UP or DOWN button so that level of waveformis 1.0 ± 0.05 Vp-p. Click the button at approx. 2-secondintervals while checking any increase or decrease inlevel of waveform.4) After step 3) is complete, be sure to click the SAVEbutton.Note that clicking the RETURN button will restore theADJUST MENU screen to the status before theadjustment was performed.5) When save is complete, the ADJUSTMENT FINISHEDdialog will appear: Click the OK button in dialog torestore the ADJUST MENU screen.ADJUST MENU screenVIDEO LEVEL ADJUSTMENT screenFig. 6-4-1MANUAL ADJUSTMENT PROGRAM for SERVICE STATIONMODEL NAME: ××××DATA INITIALIZEEXECUTE RETURNCONNECTIONADJUST MENUSAMPLING PULSEAUTO IRIS CONTROLMATRIXCHROMA GAINAUTO FUCUSSPOT NOISELCDEVFVIDEO LEVELBURST LEVEL211.0V± 0.05Vp-pMANUAL ADJUSTMENT PROGRAM for SERVICE STATIONSAVE RETURNVIDEO LEVEL ADJUSTMENTUP DOWNCONNECTION43ADJUSTMENT FINISHED dialogFINISHEDADJUSTMENT FINISHED.OK 5FINISHEDADJUSTMENT FINISHED.OK 5102VDR-M70EG / VDR-M70EB / VDR-M70GC / VDR-M50EG / VDR-M50EB / VDR-M50GCDownloaded From CamcorderManual.com Panasonic Manuals