Panasonic VDR-M70EG Service Manual

Also see for VDR-M50EB: Operating instructions Operating instructions

Panasonic VDR-M70EG Service Manual Manual pdf 103 page image

6.4.3. Burst LevelPreparations:1) Connect the oscilloscope CH1 to video out.2) Switch the oscilloscope V-MODE to “CH1” andTRIGGER SOURCE to “CH1”.Procedure:1) Choose BURST LEVEL on the ADJUST MENU screen.2) Click the EXECUTE button on ADJUST MENU screento proceed with the BURST LEVEL ADJUSTMENTscreen.3) Click the UP or DOWN button so that burst level of thewaveform is 300mV ± 15 mVp-p. Click the button atapprox. 2-second intervals while checking any increaseor decrease in burst level.4) After step 3) is complete, be sure to click the SAVEbutton.Note that clicking the RETURN button will restore theADJUST MENU screen to the status before theadjustment was performed.5) When save is complete, the ADJUSTMENT FINISHEDdialog will appear: Click the OK button in dialog torestore the ADJUST MENU screen.ADJUST MENU screenMANUAL ADJUSTMENT PROGRAM for SERVICE STATIONMODEL NAME: ××××DATA INITIALIZEEXECUTE RETURNCONNECTIONADJUST MENUSAMPLING PULSEAUTO IRIS CONTROLMATRIXCHROMA GAINAUTO FUCUSSPOT NOISELCDEVFVIDEO LEVELBURST LEVEL21BURST LEVEL ADJUSTMENT screenMANUAL ADJUSTMENT PROGRAM for SERVICE STATIONSAVE RETURNBURST LEVEL ADJUSTMENTUP DOWNCONNECTION43Fig. 6-4-2300mV± 15mVp-pADJUSTMENT FINISHED dialogFINISHEDADJUSTMENT FINISHED.OK 5FINISHEDADJUSTMENT FINISHED.OK 5103VDR-M70EG / VDR-M70EB / VDR-M70GC / VDR-M50EG / VDR-M50EB / VDR-M50GCDownloaded From CamcorderManual.com Panasonic Manuals