4.4. MESSAGES AND TROUBLESHOOTINGSome messages may appear on the LCD screen or in the viewfinder during operation.If a message appears, refer to the following table and perform troubleshooting according to themessage.Messages divided by broken lines will automatically appear in sequence from the upper row eachtime the center of joystick is pressed.MessageBattery is almost empty.Replace it.Cannot combine scene.Cannot combine.Deselect PHOTO scenes.Cannot combine.Select multiple scenes.Cannot delete scenes.Cannot execute.Unselect multiple scenes.Cannot execute.Change displaycategory to All.CANNOT RECORDPHOTOS.Cause/condition formessage to appearAppears if the battery is discharged.Appears if an attempt is made tocombine unconnected scenes: Thespecifications state that combining ofonly multiple scenes is possible.Appears if an attempt is made tocombine scenes when a photo wasselected: The specification state thatcombining of only video scenes ispossible.Appears when combining one scene wasattempted.Appears when user performed deletion atthe upper limit of 999 scenes registered.*1Appears if an attempt is made to selectmultiple scenes for division: Thespecifications state that dividingmultiple scenes is impossible.Appears when combining or movingscenes was instructed with “Category:VIDEO or PHOTO” specified.Appears if an attempt is made to recordphotos on DVD-R disc: The specificationsstate that no photo is recordable onDVD-R disc.TroubleshootingReplace with a charged battery, oruse the AC adapter/charger to powerVDR-M70/M50.Stop trying to combine scenes, orcreate a play list containing thescenes to be combined, and combinethem on the play list.Select only video scenes, or stoptrying to combine scenes.Select multiple scenes and thencombine them.Combine divided scenes, and thendelete if necessary.*2Divide scenes one by one.Specify “Category: All”, and thenoperate VDR-M70/M50 again.Use a DVD-RAM disc or card whenrecording photos.*1: the DVD video recording format defines the maximum number of entry points as 999: Since one entrypoint is allocated to one scene, the maximum number of scenes recordable on disc with VDR-M70/M50 is 999.*2: If recording is continued without editing, one scene will comprise one cell for each entry point.When scenes are combined, only the number of entry points will decrease (only the entry point is deleted);the number of cells will not decrease. Assume, for example, that the number of cells before scenes arecombined is 999, which is the upper limit defined by the DVD video recording format. If a scenecomprising one cell is divided at two points and the scene between the divided scenes needs to be deleted,the cell must be further divided in order to delete. However, since the number of cells has reached theupper limit in this case, the cell cannot be divided and the scene cannot be deleted.32VDR-M70EG / VDR-M70EB / VDR-M70GC / VDR-M50EG / VDR-M50EB / VDR-M50GCDownloaded From CamcorderManual.com Panasonic Manuals