AdvancedMain MenuVIERA LinkPictureSoundSetup1/3Q-Link SettingsChild LockTuning MenuOff Timer OffLanguageTeletextShipping Condition AccessTOPSetup MenuDVB Profile EditDVB Service ListRETURNOPTION SD CARDINPUTEXIT28 29Check the message and initialiseFollow the on-screen instructions• “Auto Setup” will automatically start. (p. 10)■ To re-tune TV channels only, e.g. after moving house“Auto Setup” (p. 27)Tuning Channels324Select “Setup”Select “Shipping Condition”Display the menuSet■ To return to TVEXITRestore SettingsShippingConditionRestoreSettingsResets the TV to its original condition, i.e. no channels tuned in.All settings (channels, picture, sound quality, etc.) are reset.1accessselectAll tuning data will be erasedAre you sure?Are you sure?EXITRETURNConfirmShipping Conditionaccessselectset• Restore Settings• Tuning ChannelsOffDVB Signal ConditionDVB Programme [70] CBBC Channel0 5 10Signal QualitySignal StrengthSelects a channel and checks the DVB signal condition.Use for adjusting the direction of the aerial.Signal Quality:• Green bar Good• Yellow bar Poor• Red bar Bad (Check the aerial)• To change the programme during the menu appearsCheckDVB signalDVB SignalConditionDisplay anotifi cationmessageNew ServiceMessageNew DVB service found!Press OK to add new service.Press EXIT to lgnore.Selects whether to give a notification message when a new DVB service is found. (Off / On)Set DVBchannelmanuallyDVB ManualTuningNormally use “Auto Setup” or “Add New DVB Services” for the DVB channel setting.If tuning has not done completely, use this function.adjust frequency( set where the level of “Signal Quality”becomes the maximum)select channelsearchDVB Manual TuningSignal QualityStopped0 10Signal Strength 0 10Frequency MHz[CH21] 474,00Prog. Channel Net ID. QualityTS ID.Service Name• All services found will be added to theDVB Service List (p. 25) automatically.AddDVB channelautomaticallyAny new services found will be added to the DVB Service List (p. 25) automatically.Add New DVB ServicesPlease wait!This will take about 3 mins.5 69Prog. Channel Service Name Net ID. TS ID. QualityZDFARDstart• The new service is added with the current settingssaved as they are.Add NewDVB ServicesSet AnaloguechannelmanuallyAnalogueManual TuningFine TuningProgramme 1 [CH33]Analogue Manual TuningManual Tuning 2 78 411■ Fine TuningUse to make small adjustments to the tuning of an individual channel (affected by weatherconditions, etc.)■ Manual TuningSet Analogue channel manually after Auto Setup.If a VCR is connected with only the RF cable, select programme position “0”.storesearchSelect the channel Search and storeSelect the programme position