Panasonic Viera TH-42PX700E Operating Instructions Manual

Contents

14 15ViewingOPTION SD CARDEXITRETURNMULTI WINDOW DIRECT TV RECINPUT• Watching Videos and DVDsWatching Videos and DVDs23Connect the external equipment (VCRs, DVD equipment, etc.) and you can watch the input.To connect the equipment (p. 8 and p. 9)The Remote Control is capable of operating some functions of selected Panasonic external equipment.Select the input mode connected to the equipmentNote• If the external equipment has an aspect adjustment function, set to “16:9”.• For details, see the manual of the equipment or ask your local dealer.■ To return to TVDisplay the Input select menuDisplays the selected mode1 Turn the TV on■ When connecting with SCART as example 2 or 3 (p. 8 and p. 9)Receives input signals automatically when playback starts• Input signals are automatically identified by the SCART (pin 8)terminal.• This function is also available for HDMI connections (p. 37).■ If input mode is not switched automaticallyPerform and• You can also select the input using the AV button on the remotecontrol or the front panel of the TV.Press the button repeatedly until the desired input is selected.• You can label or skip each input modes “Input Labels” (p. 30)• Dependant on the setup of the equipmentVCR / DVD switch∗Select VCR to operate Panasonic VCR or DVD equipmentSelect DVD to operate Panasonic DVD equipment or Player home theatreStandbySet to Standby mode / Turn onPlayPlayback videocassette / DVDStopStop the operationsRewind / Skip / SearchVCR: Rewind, view the picture rapidly in reverseDVD: Skip to the previous track or titlePress and hold to search backwardFast-forward / Skip / SearchVCR: Fast-forward, view the picture rapidly forwardDVD: Skip to the next track or titlePress and hold to search forwardPausePause / RestartDVD: Press and hold to play at slow speedProgramme Up / DownSelect programmeRecordStart recordingPanasonic equipment connected to the TV can be directly operated with the remote control.Note• Confirm correct operation after the code changed.• The codes will be reset to default values if batteries are replaced.• “DVD” means DVD player, DVD recorders and Recorder home theatre.• Some operations may not be possible on some equipment models.∗Setting your remote control to operate Panasonic VCR, DVD, etc.Set the VCR / DVD switch to the appropriate positionPress and hold during the following operationsEnter the appropriate code for the equipmentto be controlled, see table below Press“VCR” positionEquipment CodeVCR 10 (default)DVD 11“DVD” positionEquipment CodeDVD 70 (default)Player home theatre 71Input SelectionAV1AV2/AV2SAV4/AV4SAV3/AV3SCOMPONENTPCHDMI1HDMI2HDMI3TV4 Viewselectwatch