Panasonic Viera TH-P42GT30A Operating Instructions Manual

How to Use the Menu Functions36SoundItem Adjustments / Configurations (alternatives)Mode• Music• Speech• UserSelects basic sound mode• The selected mode affects all input signals.[Music]: Improves sound quality for watching music videos, etc.[Speech]: Improves sound quality for watching news, drama, etc.• In Music and Speech modes, you can adjust [Bass] and [Treble]settings, and those settings will be stored for each mode.[User]: Adjusts the sounds manually by using the equaliser to suit yourfavourite sound quality.• For the User mode, [Equaliser] will appear on the Sound Menu insteadof [Bass] and [Treble]. Select the [Equaliser] and adjust the frequency.[Equaliser] (below)Bass Increases or decreases level to enhance or minimise lower, deepersound outputTreble Increases or decreases level to enhance or minimise sharper, highersound outputEqualiserAdjusts the frequency level to suit your favourite sound quality• This function is available when [Mode] is set to [User].• Select the frequency and change the frequency level by using thecursor button.• If you want to enhance the bass sound, raise the level of the lowerfrequency. If you want to enhance the treble sound, raise the level ofthe higher frequency.• To reset the levels of each frequency to the default settings, select the[Reset Equaliser Settings] by using the cursor button, and then pressthe OK button.Balance Adjusts the volume level of right and left speakersHeadphone Volume Adjusts the volume of the headphonesSurround• Off• V-Audio• V-Audio Surround• V-Audio ProSurroundSurround sound settings[V-Audio]: Provides a dynamic enhancer of width to simulate improvedspatial effects[V-Audio Surround]: Provides a dynamic enhancer of width and depthto simulate improved spatial effects[V-Audio ProSurround]: Provides a three-dimensional sound spacewith digital reverb effectsAuto Gain Control• Off• OnAdjusts the current volume level if it is extremely different from theprevious viewed channel or input modeVolume Correction Adjusts the volume of individual channel or input modeSpeaker Distance toWall• Over 30cm• Up to 30cmAdjusts the low frequency sound• If the back space between the TV and wall is over 30 cm, [Over 30cm]is recommended.• If the back space between the TV and wall is within 30 cm, [Up to 30cm]is recommended.MPX• Stereo• Mono• M1• M2Selects multiplex sound mode (if available)[Stereo]: Use this normally[Mono]: When stereo signal cannot be received[M1] / [M2]: Available while mono signal is transmitted• Analogue TV mode only