Panasonic Viera TH-P42GT30A Operating Instructions Manual

Using Network Services74Network settings for the Wireless LAN connectionThis setting is for the network connection by using a Wireless LAN Adaptor.• Confirm the encryption key, settings and positions of your access point before starting setup.For details, read the manual of the access point.1 Select [Network Type] and set to [Wireless]12-34-56-78-9a-bcConnection TestNetwork TypeAccess Point SettingsIP/DNS SettingsNetwork Link SettingsSoftware UpdateMAC AddressNetwork SetupWireless setselect2 Select [Access Point Settings]12-34-56-78-9a-bcConnection TestNetwork TypeAccess Point SettingsIP/DNS SettingsSoftware UpdateMAC AddressNetwork SetupWirelessAccessaccessselect3 Select the connection type and setConnection TypePlease select network connection type.WPS(Push button)WPS(PIN)Search for access pointManualaccessselect[WPS(Push button)] (p. 16)[WPS(PIN)]: Sets by entering the PIN code to the access point[Search for access point] (p. 16)[Manual]: Sets manually by entering the SSID of access point• Follow the on screen instructions4 Select [Connection Test] and access to test12-34-56-78-9a-bcConnection Test AccessNetwork TypeAccess Point SettingsIP/DNS SettingsNetwork Link SettingsSoftware UpdateMAC AddressNetwork SetupWirelessCheck access point connection.Check acquired IP address.Check for devices using same IP address.Check gateway connection.Check server connection.Connection TestaccessselectPerforms automatic testing of the network connection for theTV. (It takes a while to test.): succeededThe test is successful and the TV is connected to thenetwork.: failedCheck the settings and connections, and then perform thisfunction again.If you continue to have difficulty, please contact yourinternet service provider.Update TV’s softwareAccesses the specific web site to update TV’s software and search if any software updates are available.12-34-56-78-9a-bcConnection TestNetwork TypeAccess Point SettingsIP/DNS SettingsNetwork Link SettingsSoftware UpdateMAC AddressNetwork SetupWiredAccessaccessselect [Software Update]• Follow the on screen instructionsNote12-34-56-78-9a-bcConnection TestNetwork TypeAccess Point SettingsIP/DNS SettingsNetwork Link SettingsSoftware UpdateMAC AddressNetwork SetupWired[MAC Address]• MAC address is a unique address that identifies hardware in thenetwork.(for information only)