Panasonic Viera TH-P42GT30A Operating Instructions Manual

Timer Programming45Timer ProgrammingTimer Programming from MenuThe Timer Programming menu allows you to choose programmes that you wish to remind watching orrecord to the USB HDD / SD Card. At the correct time, the TV will tune to the correct channel even if theTV is in Standby mode.TV Guide may also be used to set timer programming event (p. 22).• This function is not available in Analogue mode.• Timer Programming can store up to 15 events.• Timer Programming only works reliably if correct time information is received via the signal from thebroadcaster or service provider.• For recording using Timer Programming, the TV must be either On or in standby. For reminders to bedisplayed, the TV must be On.• No other channel can be selected while the recording of Timer Programming is in progress.• It may not be possible to record an encrypted programme (which is copy-protected).• When recording programmes to the USB HDD, be sure to format the USB HDD and enable it forrecording in [Recording Setup] (p. 52).• When recording programmes to the SD Card, prepare the SD Card without any data.• 2 minutes before the starting time, a reminder message appears if you are watching TV.• To remove the message and start theprogramming• To cancel the programmingEXITPOWERAVSD CARDASPECTINFOOPTIONSTTLTEXTGCHPOWERRETURNMUTE LAST VIEWCHVOLINDEX HOLDINPUTTVEXITMENUR Y Bjk lghi mnotuvpqrs wxyzabc defPreparations:1 Select Digital TV mode 2 Display the menu 3 Select [Timer]TV MENUSelect [Timer Programming]AccessTimer ProgrammingOff TimerAuto StandbyOffOff accessselect■ To return to TVEXIT■ To unlock thetuner and stoprecordingEXIT