Panasonic Viera TH-P42ST30A Operating Instructions Manual

Also see for Viera TH-P42ST30A: Service manual

Using Media Player62Multi Shot 3DThis TV can create the 3D photo using a pair of photos in the SD Card and save it into the sameSD Card.• This TV can also create the 3D photo from photos in the USB Flash Memory, but cannot save it.• This function is available with photos recorded by digital cameras.• Depending on the photos you select, the created 3D photo may not be suitable or the 3D photocreation may not be possible.• It is recommended to take a photo (for L) and then move your camera to the right about 5 cm and takeanother photo (for R).• To view the created 3D photo with 3D effect, you need the 3D Eyewear“Optional accessories” (p. 9)1 Display the option menu in the thumbnail viewOPTION2 Select [Multi Shot 3D]Slideshow SettingsMulti Shot 3DChange SizeOption Menuaccessselect3 Select two photos for L (left) and R (right)L ROPTIONEXITSelect RETURNMedia Player Photo All photosSelectInfoViewOption MenuSD CardMulti Shot 3D select setR• You can only select photos of the same recorded date andsame pixels.• You may not be able to view the created 3D photo properly ifyou select the photos for L and R oppositely.4 Create the 3D photo• If your selected photos are not suitable for the 3D photo, the error message will be displayedand will return to the photo selection screen.• To save the 3D photo in the SD CardThe 3D image will be saved onto your media.Continue?NoYessaveselect [Yes]After finishing saving the photo, the photo selection screen will be displayed (step 3). Select photos againto create another 3D photo or exit from [Multi Shot 3D] mode.■ To enjoy the saved 3D photosYou can enjoy viewing the saved 3D photos.3DOPTIONMedia Player Photo All photosSD CardEXITSelect RETURNSlideshow View Select Contents SelectInfoAccessOption MenuDrive SelectSaved 3D photo(Thumbnail)• Single view (p. 60)• Slideshow (p. 60)