VIERA Link Functions83[Speaker Selection] - Speaker controlYou can control the theatre speaker with this TV remote control by pointing at the TV’s signal receiver.• If you cannot operate, check the settings and the equipment“Summary of features”, “Connection”, “Preparations” (p. 79 - 80)Access and control the speaker volumePOWERINPUTTV AVSD CARDASPECTEXITMENUINFOOPTIONSTTLTEXTR G Y BCHPOWERRECRETURNjk lghi mnotuvpqrs wxyzabc defLAST VIEWCHINDEX HOLDTVMUTEVOL1 Display [VIERA Link Menu]2 Select [Speaker Selection]VIERA Link MenuPause Live TVDirect TV RecVIERA Link ControlSpeaker SelectionStartHome CinemaRecorderStartselect3 Set to [Home Cinema] or [TV]access / storeselect[Home Cinema]Player theatre, Blu-ray Disc theatre or Amplifier will be automaticallyturned on if it is in Standby mode and the sound is from theatre speakersconnected to the equipment.• Volume up / down VOL• Mute• The sound of TV speakers is mute.• When the equipment is turned off, TV speakers will be active.[TV]TV speakers are active.Multi-channel sound• If you wish to enjoy the multi-channel sound (e.g. Dolby Digital 5.1ch)via an Amplifier, connect with HDMI cable and Optical digital audiocable (p. 79), and then select [Home Cinema]. If your Amplifier has“HDAVI Control 5” function, you can connect only with HDMI cable. In thiscase, connect your Amplifier to the TV’s HDMI2 terminal.To enjoy the sound from the DIGA Recorder in multi-channel sound,connect an HDMI cable from the DIGA Recorder to the Amplifier (p. 79).Note• These functions may not work properly depending on the connected equipment.• Image or sound may not be available for the first few seconds when the Input mode is switched.• Easy playback may be available by using the remote control for Player theatre, Blu-ray Disc theatre orAmplifier. Read the manual of the equipment.• “HDAVI Control 5” is the newest standard (current as of December, 2010) for HDAVI Controlcompatible equipment. This standard is compatible with conventional HDAVI equipment.• To confirm this TV’s version of HDAVI Control [System Information] (p. 40)