Panasonic Viera TX-L32E3E Operating Instructions Manual

Also see for Viera TX-L32E3E: Service manual

Contents

49Displaying PC Screen on TVDisplaying PC Screen on TVThe screen of the PC connected to the TV can be displayed on the TV.You can also listen to PC sound with the audio cable connected.tTo connect PC p. 68EXITDIRECT TV RECASPECTOPTION RETURNMENU NINPUTTV AV To return to TVTV1 Select the external inputAV2 Select [PC]Input SelectionAV1AV2COMPONENTHDMI1PCHDMI2HDMI3TVSD CardaccessselecttCorresponding signals p. 73tIf “H-freq.” or “V-freq.” is shown in red,the signals may not be supported. PC menu setting (changed as desired)tTo make settings “How to Use Menu Functions” (p. 26)Menu Item Adjustments / Configurations (alternatives)PictureAdvanced SettingsWhite BalanceR-Gain Adjusts the white balance for red areasG-Gain Adjusts the white balance for green areasB-Gain Adjusts the white balance for blue areasR-Cutoff Adjusts the white balance for red areasG-Cutoff Adjusts the white balance for green areasB-Cutoff Adjusts the white balance for blue areasReset to Defaults Press the OK button to reset to the default White BalanceGammaGamma Switches the gamma curve [1.8] / [2.0] / [2.2] / [2.4] / [2.6]tPlease note the numerical values are reference for the adjustment.Reset to Defaults Press the OK button to reset to the default GammaSetupPC SetupInput ResolutionSwitches to a wide viewtVGA (640 × 480 pixels), WVGA (852 × 480 pixels),XGA (1,024 × 768 pixels), WXGA (1,280 × 768 pixels, 1,366 × 768 pixels)tOptions change depending on signalsClock Set to the minimum level if noise occursH-pos Adjusts horizontal positionV-pos Adjusts vertical positionClock Phase Eliminates flicker and distortiontAdjust after Clock adjustment tSet to the minimum level if noise occursSyncChooses another synchronous signal if the image is distorted [H & V] / [On Green]t[H & V] : by the horizontal and vertical signals from your PC[On Green] : by the green signal from your PC (if available)Reset to Defaults Press the OK button to reset to the default PC Setup settingstOther items p. 27 - 33NotetFor HDMI-compatible PC, possible to connect to HDMI terminals (HDMI1 / HDMI2 / HDMI3) by using HDMI cable (p. 72).