Quick Start Guide Accessories / Options7Attaching the pedestalWarningDo not disassemble or modify the pedestal.tOtherwise the TV may fall over and become damaged, and personal injury may result.CautionDo not use any pedestal other than that provided with this TV.tOtherwise the TV may fall over and become damaged, and personal injury may result.Do not use the pedestal if it becomes warped or physically damaged.tIf you use the pedestal while it is physically damaged, personal injury may result. Contact your nearest Panasonic dealer immediately.During assembly, use only screws supplied and make sure that all screws are securely tightened.tIf sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be strong enoughto support the TV. It might fall over and become damaged and personal injury may result.Ensure that the TV does not fall over.tIf the TV is knocked or children climb onto the pedestal with the TV installed, the TV may fall over and personal injury may result.Two or more people are required to install and remove the TV.tIf two or more people are not present, the TV may be dropped, and personal injury may result.A Assembly screw (4)tXSS5+15FNKM5 × 15B Assembly screw (4)tXYN4+F30FJKM4 × 30C BrackettTBL5ZA3017(TX-L32E3E, TX-L37E3E)tTBL5ZA3014(TX-L42E3E)D BasetTBL5ZX0041(TX-L32E3E)tTBL5ZX0039(TX-L37E3E)tTBL5ZX0147(TX-L42E3E)1 Assembling the pedestalUse the four assembly screws A to fastenthe bracket C to the base D securely.tMake sure that the screws are securelytightened.tForcing the assembly screws the wrongway will strip the threads.ADC Front2 Securing the TVUse only the supplied assembly screws B to fasten securely.tTighten the four assembly screws loosely at first, then tightenthem firmly to fix securely.tCarry out the work on a horizontal and level surface.BBFoam mat orthick soft cloth