Panasonic Viera TX-L32E3E Operating Instructions Manual

Also see for Viera TX-L32E3E: Service manual

Contents

Link Functions (Q-Link / VIERA Link)62Reduce unnecessary power consumption in standby [Standby Power Save]Set Standby Power Save [On] in the Setup Menu to use this function [Standby Power Save] (p. 30)The power consumption in Standby mode of the connected equipment is controlled higher or lower in synchronization withthe TV On / Off state to reduce the consumption.When the TV is set to Standby mode, the connected equipment is automatically set to Standby and the power consumption inStandby mode of the connected equipment is automatically minimised.When the TV is turned on, the connected equipment is still in Standby mode, but the power consumption is increased to makestartup time early.tThis function is effective if the connected equipment can change the power consumption in Standby mode and is set tohigher consumption.tThis function will work when [Power off Link] is set to [On].Auto standby for unnecessary equipment [Intelligent Auto Standby]Set Intelligent Auto Standby [On (With reminder)] or [On (No reminder)] in the Setup Menu to use this function[Intelligent Auto Standby] (p. 30)When the TV is On, non-watched or non-used connected equipment goes into Standby mode automatically to reduce thepower consumption. For example, when the input mode is switched from HDMI, when Speaker Selection is changed to [TV](except for watching a disc).tIf you select [On (With reminder)], the on screen message will be displayed to be noticed before working this function.tThis function may not work properly depending on the connected equipment. If required, set to [Off ].Direct TV Recording - What you see is What you record [Direct TV Rec]Recording the current programme in DIGA Recorder immediately.tIf you connect a variety of recorders including other manufacturers’ recorders at the same time, please connect DIGARecorder to the TV’s lower HDMI terminal number. For example, if you use HDMI1 and HDMI2 for two recorders, in this caseconnect DIGA Recorder to HDMI1.tIf you cannot operate, check the settings and the equipment“Summary of Q-Link and VIERA Link features” (p. 58, 59), “Preparations” (p. 61)tIf you wish to record the programme which DIGA Recorder does not support, SCART connection is required and theprogramme is recorded by Q-Link function (p. 60).tDepending on the programme, SCART connection may be required to record.tChanging channel or turning off the TV is available while the recorder is recording from its own tuner.tChanging channel is not available while the recorder is recording from the TV tuner.RETURNMENU NASPECTINPUTTV AVSD CARDOPTIONEXITDIRECT TV REC1 Display [VIERA Link Menu]2 Select [Direct TV Rec] and start recordingVIERA Link MenuPause Live TVDirect TV RecVIERA Link ControlSpeaker SelectionStartHome CinemaRecorderStartstartselecttYou can also start recording directly.DIRECT TV REC To stop recordingSelect [Stop] in [Direct TV Rec]VIERA Link MenuPause Live TVDirect TV RecVIERA Link ControlSpeaker SelectionStopHome CinemaRecorderStartstopselecttYou can also stop recording directly.Unlock the tunerTuner LockedPress EXIT to unlock and stop recordingEXIT