Panasonic WJ-HD220 Operating Instructions Manual

Also see for WJHD220 - DIGITAL DISK RECORDER: Reference Reference Specifications Operating instructions Brochure & specs

Contents

Panasonic WJ-HD220 Operating Instructions Manual Manual pdf 41 page image

41 HTTP Port (HTTP PORT)Set an HTTP port number.The default is 80.Available port numbers: From 00000 to 65535, exceptthe "well-known port" numbers assigned by IANA(Internet Assigned Numbers Authority) Dynamic Host Configuration Protocol(DHCP)Dynamic Host Configuration Protocol is enabled or dis-abled.The default is OFF.Note: When ON is selected, you cannot enter the IPaddress, netmask, or gateway. The host gives theseparameters.The given parameters will be displayed after gettingthe IP address from the DHCP server. IP Address (IP ADDR)The default is "192.168.000.010". Netmask (NETMASK)The default is "255.255.255.000". Gateway (GATEWAY)The default is "192.168.000.001". Switcher Setup (SWITCHERSETUP)Video switcher functions are programmed in this menusetup. Start Display (START DISPLAY)The image in the selected form will be displayed on themultiscreen monitor and spot monitor when the recorder isturned on.The default is QUAD-4A for MULTI OUT and 1 for SPOTOUT.Single image: CH 1 to CH 8*Quad image: QUAD-4A (including 1-4), QUAD-4B(including 5-8)Multi image: 9SCREEN (including 1-8)Sequence: SPOT SEQ*, MULTI SEQNote: The spot monitor can display only CH 1-8* andSPOT SEQ* while the multiscreen monitor can dis-play all forms listed above. Multiscreen Selection (MULTI SELMODE)When pressing the [MULTI SCREEN SEL] button on thefront panel, the monitor display will change as followsdepending on the setup.QUAD ONLY: QUAD-4A → QUAD-4B → QUAD-4AALL: QUAD-4A → QUAD-4B → 9SCREEN → QUAD-4A Sequence Setup (SEQUENCESETUP)1. Move the cursor to SEQ SETUP in the SWITCHERSETUP menu, and press the JogDial.The SEQUENCE SETUP menu opens.2. Select either MULTI SEQ SETUP or SPOT SEQ SETUPwith the [D] or [C] button, and press the JogDial. Theselected menu opens.SWITCHER SETUPSTART DISPLAYMULTI OUT QUAD-4ASPOT OUT 1CHMULTI SEL MODE ALLSEQUENCE SETUPOCAMERA VIEW SETUPOSECRET VIEW OFFSEQUENCE SETUPMULTI SEQ SETUPOSEQUENCE TIMING INTAUTO SKIP ONSPOT SEQ SETUPOSEQUENCE TIMING INTAUTO SKIP ON