Panasonic WJ-HD309 Operating Instructions Manual

Also see for WJHD309 - DIGITAL DISK RECORDER: Manual Operating instructions Operating instructions Operating instructions Specifications

Contents

Panasonic WJ-HD309 Operating Instructions Manual Manual pdf 121 page image

121● Auto CopyON or OFF whether or not to copy recorded images to thecopy area on the hard disk automatically.OFF: Does not copy automatically.ON: Copies recorded images to the copy area on the harddisk of this unit.Important:• When OFF is selected, the auto copy function at anevent occurrence and emergency recording will notfunction.• The auto copy will not work if a DVD-RAM disk drive isnot connected even though "COPY 1" or "COPY 2" isselected.• Images recorded (by event pre-recording) in the pre-recording area on the hard disk will not be copied auto-matically.w [Time & Date] Setting of the date and timePerform the following settings of the time and date.● Date FormatSelect a display format for the date from the following. (Ex.April 1, 2003)YY.MM.DD: 03.4.1MMM.DD.YY: APR.1.03DD.MMM.YY: 1.APR.03● Time FormatSelect a display format for the time from the following. (Ex.3 o’ clock just in the afternoon)12h: 3:00:00 PM24h: 15:00:00● Time SetupAdjust the current time and date.Enter year, month, day, hour, minute and second in order,move the cursor to "SET" and press the SET button.Important:Recording will stop for around 4 seconds just after set-ting date and time.● Auto Adjust TimeSelect a method for auto time adjustment from the follow-ing.When "MASTER" is selected, a signal will be supplied fromthe ALARM/CONTROL connector as the MASTER time (seebelow) at the specified time.OFF: Does not function.MASTER: A signal will be supplied from the ALARM/CON-TROL connector on the rear and the clock of otherdevices will be adjusted with reference to the time ofthis unit.SLAVE: A signal will be supplied to the ALARM/CONTROLconnector on the rear and clock of this unit will beadjusted.Important:Recording will not be performed for around 4 secondswhen changing the present time (accurate within ±5seconds) using the time adjustment input (pin no.20) ofthe ALARM/CONTROL connector on the rear panel.● Master TimeSpecify the time when supplying a signal from theALARM/CONTROL connector.● Summer Time (Day Light Saving)Select the way of switching the summer time from the fol-lowing.OFF: Does not function.ON: Applies summer time.AUTO: Applies summer time in accordance with the settingof the summer time (see next page).● Summer Time (Day Light Saving) TableDo the following to specify the start time & date and the endtime & date of summer time.[Screenshot 1]Start operation from the "Time & Date" menu.z Move the cursor to "Summer Time (Day Light Saving)Table" using the arrows button (C D) and press theSET button.ScheduleSystemCommSwitcherSETUP MENU LIVEMaintenance Recording EventDisplayBasic SetupTime & DateUser Regist.User EditUser DeleteHost Regist.Host EditHost DeleteUser LevelSave/LoadMMM.DD.YY12HSETOFF12 :00 AMAUTOSETUP■ Date Format■ Time Format■ Time & Date■ Auto Adjust TimeMaster Time■ Summer Time(Day Light Saving)■ Summer Time(Day Light Saving)TableAMJAN . 01 . 03 12 00 00: :ScheduleSystemCommSwitcherSETUP MENU LIVEMaintenance Recording EventDisplayBasic SetupTime & DateUser Regist.User EditUser DeleteHost Regist.Host EditHost DeleteUser LevelSave/LoadMMM.DD.YY12HSETOFF12 :00 AMAUTOSETUP■ Date Format■ Time Format■ Time & Date■ Auto Adjust TimeMaster Time■ Summer Time(Day Light Saving)■ Summer Time(Day Light Saving)TableAMJAN . 01 . 03 12 00 00: :