16z Insert the power plug to an outlet (AC 120 V,60 Hz)Note: Make sure the power source is AC 120 V, 60 Hz.x Turn on the power switch on the rear panel.The OPERATE indicator will light and the system check(checking the system and hard disk) will start.The startup splash image below will be displayed on moni-tor 2 and the VGA monitor during the system check.When the auto login is off, the login window will be dis-played if any button on the front panel of this unit is pressedafter the system check. (Go to step 3)When the auto login is on, live images will be displayedafter the system check.Notes:• If the hard disk configuration had been changed afterthe last startup or the hard disk has problems, the HDDDISK MENU will be displayed automatically after thestartup splash. (Refer to page 130 for further informa-tion.)• It is possible to display the disk configuration menu bypressing the SET button when the image below thatsays the system check has been completed is dis-played.Important:When using the optional extension unit (WJ-HDE300),turn the power of this unit after turning on the power ofall extension units.c Enter a user name and password.Rotate the jog dial to select a character to be entered in thecursor position.It is also possible to enter numbers by pressing the cameraselection buttons ([1] - [10/0] for the WJ-HD316, [1] - [9],[0] for the WJ-HD309).To move the cursor, press the arrow buttons.Use the same method to enter or edit characters attachedto images. Refer to page 54 for further information.Notes:• The default user name and password are as follows:User name: ADMINPassword: 12345• To enhance the security, change the password for anadministrator before start running the unit. It is recom-mended to change the password for an administratorperiodically.v Display a live image.Press the SET button to display a live image.If the authentication (login) window is displayed, enter username and password.When authenticated, a live image will be displayed.When not authenticated, the authentication (login) windowwill be displayed again.STARTUP
