Panasonic WJ-HD309 Operating Instructions Manual

Also see for WJHD309 - DIGITAL DISK RECORDER: Manual Operating instructions Operating instructions Operating instructions Specifications

Contents

Panasonic WJ-HD309 Operating Instructions Manual Manual pdf 93 page image

93Perform the settings for the hard disk drives.It is possible to check the histories (log) of event occur-rence, error occurrence and access.q [REC Rate] Check the recording rate and theimage quality for each camera channel.Recording rate for each recording mode for each cam-era (as shown below) will be displayed in list form.MANU: Manual recordingSCHE: Schedule recordingPRE EVT: Pre-event recordingPOST EVT: Post-event recordingEMR: Emergency recordingw [Disk Info] Check the available hard disk spaceThe available hard disk space of the following will bedisplayed: The built-in hard disk (normal recordingarea, event recording area and copy area), optionalextension unit (EXT1 - 7), DVD-RAM, CD-R and DVD-Rdisk drive connected to the copy port (COPY1 orCOPY2).Refer to page 25 for more details on the built-in harddisk.It is also possible to perform the settings for the hour-meter (the active time of the HDD) warning and for theHDD safety mode with this menu.■ [Maintenance] Functions for MaintainingREC RateDisk InfoVersion InfoDisk End ModeDisk CapacityDate DeleteEvent LogError LogAccess LogSET UP MENU Recording Event ScheduleSystemDisplay CommSwitcher LIVEMaintenanceSUPER FINEFINENORMALEXTENDEDAUTOAUTOAUTOAUTOAUTOAUTOAUTOAUTOAUTOAUTOAUTOAUTOAUTOAUTOAUTOAUTO1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ipsCAM 1CAM 2CAM 3CAM 4CAM 5CAM 6CAM 7CAM 8CAM 9CAM 10CAM 11CAM 12CAM 13CAM 14CAM 15CAM 16MANU SCHE POST EVT EMRPRE EVTREC RateDisk InfoVersion InfoDisk End ModeDisk CapacityDate DeleteEvent LogError LogAccess LogSET UP MENU Recording Event ScheduleSystemDisplay CommSwitcher LIVEMaintenanceSUPER FINEFINENORMALEXTENDEDAUTOAUTOAUTOAUTOAUTOAUTOAUTOAUTOAUTOAUTOAUTOAUTOAUTOAUTOAUTOAUTO1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ips1ipsCAM 1CAM 2CAM 3CAM 4CAM 5CAM 6CAM 7CAM 8CAM 9CAM 10CAM 11CAM 12CAM 13CAM 14CAM 15CAM 16MANU SCHE POST EVT EMRPRE EVTSETUP MENU Event ScheduleSystemDisplay CommSwitcher LIVEMaintenance RecordingREC RateDisk InfoVersion InfoDisk End ModeDisk CapacityData DeleteEvent LogError LogAccess LogMAIN 160 GB 160 GB15000h 15000hEXT7 160 GB 160 GB15000h 15000hEXT6 160 GB 160 GB15000h 15000hEXT5 160 GB 160 GB15000h 15000hEXT4 160 GB 160 GB15000h 15000hEXT3 160 GB 160 GB15000h 15000hEXT2 160 GB 160 GB15000h 15000hEXT1■ Warning for Disk Life Time■ HDD Safety Mode160 GB 160 GB15000h 15000h160 GB 160 GB15000h 15000h160 GB 160 GB15000h 15000h160 GB 160 GB15000h 15000h160 GB 160 GB15000h 15000h160 GB 160 GB15000h 15000h160 GB 160 GB15000h 15000h160 GB 160 GB15000h 15000hNormal REC AreaEvent REC AreaCopy AreaCOPY 1 (Rear)COPY 2 (Front)3000hOFFRemaining1 2 3 41800GB1200GB1000GB1000GB1000GBNotes:• The displayed available disk space on this menuwill not include the space required for data man-agement. Therefore, the understated available diskspace will be displayed.• When CONTINUE is selected for "Disk End Mode" of"Maintenance", available disk space will be dis-played as "--".• "**" will be displayed to refer to a disk that is notconnected or not existed area on the disk.• Hour meter warning settingSelect the duration as the maximum active time of thehard disk from the followings. Warning will be displayedwhen the set time have passed. Hard disk drives willneed to be replaced after around 20 000 - 30 000 hoursof operation in case they are used at temperature of25 ˚C (77 ˚F). (Refer to page 6.)10 000 h/20 000 h/30 000 h• HDD safety modeWhen maintaining (HDD replacement, installation, etc.)without turning the power of the unit off, select ON for"HDD Safety Mode". The unit will be restarted in theHDD Safety Mode. Refer to page 67 for further informa-tion.(The default setting is ON.)e [Version Info] Check the version informationVersion information of the software and the hardware,and the MAC address will be displayed.SETUP MENU Event ScheduleSystemDisplay CommSwitcher LIVEMaintenance RecordingREC RateDisk InfoVersion InfoDisk End ModeDisk CapacityData DeleteEvent LogError LogAccess Log■ Software■ Hardware (M)(V)■ Mac AddressV1.00V1.00V1.00AA-BB-CC-DD-EE-FF