Panasonic WJ-HD309 Operating Instructions Manual

Also see for WJHD309 - DIGITAL DISK RECORDER: Manual Operating instructions Operating instructions Operating instructions Specifications

Contents

Panasonic WJ-HD309 Operating Instructions Manual Manual pdf 36 page image

36Any motion will be detected anywhere in the A, B, C, Dareas.Note: In the ANY AREA mode, it is possible to set themasking duration. When the masking duration is set,motion will be ignored for a certain period (set durationas the masking duration) in the same area. It is conve-nient to set the masking duration to make the subjectperiod shorter in case it is necessary to search anextended time range or searching through manyresults.It will be subject to be listed if an object moves within theset time to the other detection areas in the set order.The following is an example.Motion is detected in area B within 10 seconds after beingdetected in area A.Motion is detected in area C within 20 seconds after beingdetected in area B.Motion is detected in area D within 10 seconds after beingdetected in area C.When all of the above have occurred, an event action willbe performed.It will be subject to be listed if an object keeps moving forthe set period in the detection area. For example, in case ofthe following settings; 10 sec. for areas A and B, 20 sec. forarea C and 30 sec. for area D:An event action will be performed when an object keepsmoving more than the set period in the specified detectionarea.Important:• When images to be searched are recorded with lowrecording rate, the DURATION mode may not work cor-rectly.• It may take time to search according to the contents ofthe recorded images.■ To delete the motion detectionareaz Rotate the jog dial to select "DELETE AREA"on the status bar.Note: To delete all the motion detection areas, select"DELETE ALL AREA" and press the SET button.x Move the cursor to the motion detection areato be deleted using the arrows button andpress the SET button.The selected area will be deleted.● Detection ModeSet how to detect motion in the set motion detection area.There are 3 detection modes as follows:Important:It is impossible to set two or more detection modessimultaneously.It will be subject to be listed if "motion" is detected in any ofthe set motion detection areas.A BC DA BC D10 s10 s20 sA BC DR2R1 LOGOUTMONITOR1MONITOR2592610/014133711SHIFT SEQCOPYDISK SELECTEL-ZOOMTEXTLOGOUT4812OSDMARK115 16 BUSY316REV FWDSTOP PLAY PAUSE REC - REC STOPSEARCHSETUP/ESCPAN/TILTSLOWA-BREPEATGOTOLASTLISTEDZOOM/FOCUSIRISPRESET/AUTO SET– +zx xPAN/TILT