35■ Status DisplayThe status display shows the system status of the DiskRecorder.It is displayed on the screen of the Multiscreen Monitor dur-ing recording and playback and contains the followinginformation.The status display is only available on the screen of theMultiscreen Monitor.Pressing the DISPLAY button toggles all displays on themonitor on and off.(The Spot Monitor only displays the Group Title andCamera Title.)q Time DisplayDisplays the hours (24-hour), minutes, and seconds.“✽” indicates that summer time mode is selected.w Date Displaye Recording Status and Recording Number DisplayDisplays the recording status and recording numbercurrently being played back.The recording number is automatically assigned whenrecording.REC ✽✽%: Indicates that images are being recorded.(✽✽ indicates the remaining space of the Hard Diskwhen the HDD DISKEND is set to STOP in the setupmenu.)EMERGENCY: Indicates that an Emergency Recordingis being made.✽✽✽✽✽✽✽✽✽: Recording Number (during playback)MONITORS AND DISPLAYS■ Spot and Multiscreen MonitorThe WJ-HD500A Disk Recorder can be connected to twoMonitors.The monitor displays the video signal according to the con-nection made, as shown below.Spot Monitor: The monitor that is connected to theSPOT OUT connector on the rear of the Recorder.It only displays the video input in single spot or sin-gle sequence.Displaying the Disk Recorder’s playback is dis-abled.Multiscreen Monitor: The monitor that is connected tothe MULTISCREEN OUT connector on the rear ofthe Recorder.It can display the video input in multiscreen mode(4, 7, 9, 10, 13,16 screen segments).It also displays the Recorder’s playback images.Pressing the SETUP/ESC button for two seconds ormore will automatically select this monitor and dis-play the Disk Recorder’s Setup menu.Note: When a Disk Recorder equipped with theoptional WJ-HDB502 Network Board isaccessed from a PC via a network, the Multi-screen Monitor screen will turn blue and will notdisplay live camera images. The monitorscreen will display the message "Controlled(Network)".Pressing one of the numeric but-tons (1 - 16) will display the selected cameraimages in a single spot. This function is notavailable when CAMERA GENLOCK ON isselected on the COMMON SETUP menu.wq yu!0ioertSPOTOUTOUTMULUTI SCREENONOFFPOWERONOFFPOWERSpot Monitor Multiscreen MonitorDisk RecorderWJ-HD500A
