57■ Sequence Setup (MultiscreenMonitor)There are three sequence patterns to run on theMultiscreen Monitor.The items shown below let you program the sequence torun on the Multiscreen Monitor.● Live SequenceLive sequence is a series of 16 steps assigned to theMultiscreen Monitor.The sequence steps can be combined with four screensegments (quad) display.● Live Sequence Pattern Setting1. Move the cursor to MULTI LIVE SEQUENCE SETUP inthe SEQUENCE SETUP menu by pressing the D or Cbutton, then press the SET button.The menu shown below appears on the monitor screen.2. Move the cursor to the step editing area by pressingthe A, B, D or C button.3. Select a camera to be displayed for CAM editing areaby pressing the + or - button.1 - 16: Displays the image of the selected camera num-ber.4A - 4D: Displays the assigned images in quad.Refer to the QUAD PATTERN SETUP for settings.--: Disables display and will skip automatically.4. Move the cursor to the PRESET editing area by press-ing the B button, then select a preset position to bedisplayed by pressing the + or - button, if applica-ble.1 - 64: Selects a preset position of the assigned cam-era.--: No preset positionThe factory default setting is --.These items let you determine functions such as sequenceand power on status for this Disk Recorder.1. Select MULTIPLEXER SETUP in the WJ-HD500 SETUPmenu by pressing the D or C button, then press theSET button.The MULTIPLEXER SETUP menu as shown belowappears on the monitor screen.2. Select an item or item parameter in the menu by press-ing the D or C button.3. To return to the WJ-HD500 SETUP menu, press theSETUP/ESC button.Sequence SetupThese items let you program the sequence pattern for theSpot and Multiscreen Monitor.1. Move the cursor to SEQUENCE SETUP in the MULTI-PLEXER SETUP menu by pressing the D or C button,then press the SET button.The SEQUENCE SETUP menu as shown below appearson the monitor screen.2. Select an item or item parameter in the SEQUENCESETUP menu by pressing the D or C button.3. To return to the previous MULTIPLEXER SETUP menu,press the SETUP/ESC button.5 MULTIPLEXER SETUPSEQUENCE SETUPPOWER ON MULTI OUTPUT QUAD-4ASPOT OUTPUT 1SECRET VIEW OFF5-1 SEQUENCE SETUPMULTI LIVE SEQUENCE SETUPQUAD SHIFT OFFQUAD PATTERN SETUPSEQ TIMING INTGROUP SEQ MODE QUADSEQ DWELL 2SAUTO SKIP ONSPOT LIVE SEQUENCE SETUPSEQ TIMING INTAUTO SKIP ON5-1-1 MULTI LIVE SEQUENCE SETUPPRE- PRE-STEP CAM SET SEC STEP CAM SET SEC1 4A -- 2S 9 -- -- 0S2 4B -- 2S 10 -- -- 0S3 4C -- 2S 11 -- -- 0S4 4D -- 2S 12 -- -- 0S5 -- -- 0S 13 -- -- 0S6 -- -- 0S 14 -- -- 0S7 -- -- 0S 15 -- -- 0S8 -- -- 0S 16 -- -- 0SMULTIPLEXER SETUP
