Panasonic WJ-MS488 Operating Instructions Manual

Also see for WJMS488 - QUAD UNIT: Operating instructions

Contents

-13-You can set the following items:• CAM TITLE• TITLE SET• TITLE POSI• ALARM TITLE• STILL TITLENote: To return to the MAIN menu, press the ESCbutton.3-6-1. CAM TITLEThis parameter lets you enable or disable the cameratitle display on the monitor screen.1. Move the cursor to the CAM TITLE parameter.2. Select ON or OFF.ON: Title is displayed.OFF: Title is not displayed.** TITLE SETUP **CAM TITLE ONTITLE SET *TITLE POSI *ALARM TITLE ONSTILL TITLE ON3-6-2. TITLE SETThis parameter lets you edit a camera title.1. Move the cursor to TITLE SET.2. Press one of the SELECT (–, +) buttons. The EDIT-TING menu appears on the monitor screen and “1”starts blinking.3. Move the cursor to the channel number whose titleis to be edited by pressing the CURSOR (CC,DD,AA,BB) buttons.4. Select a character by pressing the SELECT (–, +)buttons.5. After selecting the first character, press the CUR-SOR button (BB). Then select the second character.6. Repeat steps 3 to 5 above to complete the title.7. Repeat steps 3 to 6 to edit the other channels.8. Press the ESC button to return to the previousmenu.A B C D E F G H I J K L MN O P Q R S T U V W X Y Z0 1 2 3 4 5 6 7 8 9← → = ? ' " # & ( ) * + ,- . / : ;E (blank)** TITLE SETUP **CAM TITLE ONTITLE SET *TITLE POSI *ALARM TITLE ONTITLE EDIT ONSTILL ALARM ON** TITLE **1: 1.......2: 2.......3: 3.......4: 4.......5: 5.......6: 6.......7: 7.......8: 8.......41 32Camera title edit areaChannel numbersTo erase a specific character1. Select a character to be erased.2. Select “•” (blank mark) to erase the character.To erase the title of a specific channel1. Move the cursor to a character of the title to beerased.2. Press the SELECT (– and +) buttons simultaneous-ly.3-6-3. TITLE POSIThis parameter lets you select the position on the moni-tor screen where you want the title to be displayed.1. Move the cursor to TITLE POSI.2. Press one of the SELECT (–, +) buttons. The TITLEPOSITION menu with the title of channel 1 appearson the monitor screen.3. Select the position where the title is to be displayedby pressing the CURSOR (CC,DD,AA, BB) buttons.4. Press the MENU button to return to the previousmenu.** TITLE SETUP **CAM TITLE ONTITLE SET *TITLE POSI *ALARM TITLE ONSTILL TITLE ON