Panasonic WJ-MS488 Operating Instructions Manual

Also see for WJMS488 - QUAD UNIT: Operating instructions

Contents

-14-** TITLE SETUP **CAM TITLE ONTITLE SET *TITLE POSI *ALARM TITLE ONSTILL TITLE ONALARM3-6-5. STILL TITLEThis parameter lets you enable or disable "STILL" dis-play while a picture is paused.1. Move the cursor to the STILL TITLE parameter.2. Select ON or OFF.ON: “STILL” is displayedOFF: “STILL” is not displayed** TITLE SETUP **CAM TITLE ONTITLE SET *TITLE POSI *ALARM TITLE ONSTILL TITLE ONSTILL?STILL3-7. CH SETUPThis parameter lets you select the position where thecamera picture will be displayed on the multiscreen.Note: Before you set up the CH SETUP menu, setting ofthe VCR OUT menu is required.1. Move the cursor to CH SETUP.2. Press the SET button. The CH SETUP menu appearson the monitor screen.3. Move the cursor to the number of the picture seg-ment in the multiscreen by pressing the CURSOR(CC, DD, AA, BB) buttons.4. Select the channel number to be assigned to theselected picture segment by pressing the SELECT(–, +) buttons.5. Repeat steps 3 and 4 above to assign the otherchannels to the picture segments.6. Press the SET button to finalize channel assignment.Notes:• QUAD A consists of QUAD SET 1-4, and QUADB consists of QUAD SET 5-8.• When OFF is selected, no picture is assigned tothat channel so that no picture is displayed onthe monitor screen.• When OFF is selected, “CHXX LOSS” does notappear for that channel on the monitor screenwhen the video loss alarm is detected eventhough the VIDEO LOSS parameter is ON.** MAIN **SYSTEM SETUP *ALARM BUZZER 2SECALARM OUT 2SECALARM AUTO RESET OFFSEQ SETUP *TITLE SETUP *CH SETUP ***CH SETUP**3X3 SET QUAD SET1: 1CH 1: 1CH2: 2CH 2: 2CH3: 3CH 3: 3CH4: 4CH 4: 4CH5: 5CH 5: 5CH6: 6CH 6: 6CH7: 7CH 7: 7CH8: 8CH 8: 8CH9: OFFNote: All channel titles will be displayed in the sameposition. You cannot specify a different positionfor each title.3-6-4. ALARM TITLEThis parameter lets you enable or disable "ALARM" dis-play when the alarm is activated.1. Move the cursor to ALARM TITLE .2. Select ON or OFF.ON: “ALARM” is displayedOFF: “ALARM” is not displayed.1 (5) 2 (6)3 (9) 4 (8)1 2 34 5 67 8 9