Panasonic WJ-MS488 Operating Instructions Manual

Also see for WJMS488 - QUAD UNIT: Operating instructions

Contents

-17-Example of Full Picture Pattern Sequences.1 CH4A (QUAD-A)8 CH3 x 34B (QUAD-B)4A (QUAD-A)3 CH2 CHD. Quad Picture SequencesNotes:• Setting of the VCR OUT menu is required inadvance. See page 8 for details.• Setting of the SEQ SETUP menu is required inadvance. See page 12 for details.1. Press the MULTISCREEN button to display the quadpicture.2. Select the SEQ mode (indicator lights) by pressingthe MODE button.3. Press the SET button. The SEQ indicator goes offand the PLAY indicator lights, then the QUAD-A andQUAD-B are displayed alternatively with the dwelltime you set on the SEQ SETUP menu.Camera 1PictureCamera 2PictureCamera 5PictureCamera 6PictureExample of quad picture sequenceCamera 3PictureCamera 4PictureCamera 7PictureCamera 8PictureQUAD-AQUAD-BNote: This mode is not available for 3x3 pictures.C. Full Picture Pattern SequencesNotes:• Setting of the SEQ SETUP menu is required inadvance. See page 12 for details.• To display the multiscreen in this mode, setting ofthe VCR OUT menu is required. See page 8 fordetails.• See page 19 about recording pictures in this mode.1. Press one of the VIDEO SELECT buttons to displaythe full size single picture.2. Select the SEQ mode (indicator lights) by pressingthe MODE button.3. Press the SET button. The SEQ indicator goes offand the PLAY indicator lights, then the picture is dis-played in the sequential order with the dwell timeyou set on the SEQ SETUP menu.** VCR OUT **QUAD A ONQUAD B ON3x3 ON** SEQ SETUP **FULL SEQ QUAD SEQ1: 1CH 1: 4A 2SEC2: 4A 2: 4B 2SEC3: 8CH4: 3x35: 2CH6: 3CH7: 4A8: 4B9: OFF10: OFF