Panasonic WJ-ND400K Setup Instructions

Also see for WJ-ND400K: Operating instructions Manual Specification Specification sheet Quick reference guide

Contents

Panasonic WJ-ND400K Setup Instructions Manual pdf 31 page image

31BasicsConfigure the system settings to operate the recorder.Use the following procedure to configure basic system settings.1 Click the [Basic] button on the setup menu.2 On the sub-menu that appears, click [Basic].This will display the setting window.3 Configure the settings for each item.Refer to “Basic setup” table for details about the settings.4 Click the [Set] button.Basic setup♦Initial defaultBasicsItem Settings DescriptionRecording Off / On♦ Specifies whether recording should be performed.• Recording is not performed when [Off] is selected. Select[On] for this setting except to force a recording to stop.LCD setup lock Off♦ / On Locks front panel buttons to prevent them from being operated.• When [On] is selected, buttons can be unlocked by enteringa password, but they will re-lock automatically if no operationis performed for a certain period of time (about one minute).Password Enter password(12345♦)Specifies a password for releasing LCD setup lock. Sets apassword of five single-byte characters.Language Japanese / English♦ / Français /Español / Deutsch / Italiano /Russian / Chinese / CustomSpecifies the language used in browser screens.• Contact your dealer for further information about thecustomized language (Custom).Go to last before 5s / 10s / 30s♦ / 1min / 5min Specifies the time the image is displayed when the [Go to last]button is clicked on the operation window.Buzzer Off / 2s♦ / 5s / 10s / 20s / 30s /1min / ExtSpecifies the duration that the buzzer sounds whenever anerror occurs on the recorder.• Selecting [Ext] causes the buzzer to continue to sound untilthe [ERR] button is clicked or the [BUZZER STOP] button onthe front panel is pressed.Error output duration Off / 2s♦ / 5s / 10s / 20s / 30s /1min / ExtSpecifies the duration of the error output whenever an erroroccurs on the recorder. For details about error output, refer tothe Installation Guide.• Selecting [Ext] causes signal output to continue until the[ERR] button is clicked.Safe shutdown time 10s♦ / 20s / 30s / 1min / 2min /3min / 4min / 5minSpecifies the time until shutdown starts after a power downdetection signal is input to the recorder.