Panasonic WJ-ND400K Setup Instructions

Also see for WJ-ND400K: Operating instructions Manual Specification Specification sheet Quick reference guide

Contents

Panasonic WJ-ND400K Setup Instructions Manual pdf 45 page image

Schedules45Clicking the [Measurement] button displays a window that you canuse to confirm that the specified rates provide proper operation onthe network being used. A red rate setting value indicates that liveimages or recording of the image may not be possible at thespecified rate.Measurement takes about 90 seconds.• When measurement results (total of all camera maximumspeeds) are greater than the recorder network speed, heavynetwork traffic can cause dropping of recorded images, liveimages, alarms, and other data, degraded operational response,restarts, and other problems. (Guideline network speed: 128Mbps)• Even when measurement results do not exceed the aboveguideline network speed, the number of connected cameras andPCs can cause some of the phenomena described above.Note:• Other users connected to the recorder are logged outautomatically during measurement. They are logged back inafter measurement is complete.• Measurement results are for reference only. They are subject tochange in accordance with the network environment.• The target for measurement is the value after clicking [Set].• Since the recorder uses a network, network traffic and otherfactors can make it impossible to obtain live video and recordedimages as expected from the setup, slow browser response, orbroken connections. Also, recording may not be possible whenthe recorder is in use or malfunctioning. We are not liable forlost content.About the [Measurement] buttonImportant:• Network traffic volume fluctuates depending on the networkenvironment. Set a rate based on measurement results toensure enough margin for maximum network speed.• Recording, playback, live video, a copying are all disabledwhile measurement is in progress.