121Event action Description Mode*1A B C DAlarm actionSound the buzzer The buzzer will start sounding for the duration set inadvance.● × ● ×Outputs alarm signals Output signals will be sent from the ALARM/CONTROLconnector at the rear of the recorder.● × ● ×Display event information onthe main monitorThe event type and terminal/camera number will bedisplayed on the status display panel. At the same time,the alarm button turn red.b × b ×Display the alarm icon on aweb browserThe alarm icon will be displayed on the event errordisplay area of the web browser.b b b ×Display the alarm messageon a web browserA window that notifies of an event occurrence will bedisplayed on the web browser.The alarm message displayed last has priority. To close*the window, click the [x] button.● × ● ×Record the alarm logs*3 Date & time of the event and event information will berecorded in a log list.● ● ● ●*2Send a mail that notifies ofan event occurrenceAn e-mail notifying of the event and its date & time (alarmmail) will be sent to registered e-mail addresses (up to 4).● × ● ×Provide an alarm notificationto a PC according to thePanasonic alarm protocolsettingWhen an event occurs, a notification will be sent to a PCin accordance with the settings made under [Panasonicalarm protocol]. (☞ Page 41, 57)● × ● ×Display the images on a1-screen when an alarmoccursDisplay the images recorded by the camera associatedwith the alarm number on a 1-screen● × ● ×*1 ○: Takes action regardless of the setting, ●: takes action in accordance with the setting, ×: takes noaction*2 Since the face matching function is not performed when "Mode" - "Advanced face matching alarm set up"is set to "Off", there is no entry made into the log either.*3 When "On" is selected for the "Attach alarm information" setting of the camera, i-VMD type information willbe displayed in the alarm log. For further information, refer to the operating instructions of the camera inuse.Stop buzzer beepingThe buzzer sounding to announce an alarm or error can be stopped from the recorder’s front panel.Step 1Press the [BUZZER STOP] button.The buzzer will stop.→→ERROR RECOPERATE ALARMBUZZER STOPMOUSECOPYNote:The buzzer can also be stopped by canceling the•alarm action or error action. (☞ Page 122) The[BUZZER STOP] button does not reset any of theother alarm actions.
