50Configure the settings relating to sub monitors [Sub monitor]Set up the sub monitor by selecting the camera images to display, the image display duration, etc.■ Display settingsSet the display sequence for camera images (imageswitching).[Mode]Select how to display images from the cameras.1-screen live sequence: Images from the cameraswill sequentially be switched and displayed on1-screen.4-screen live sequence: Images from the cameraswill sequentially be switched and displayed on4-screen.9-screen live sequence: Images from the cameraswill sequentially be swiitched and displayed on9-screen.Switch by alarm terminal input: Switches camera1 to 9 to display images on 1-screen accord-ing to the signal input triggered by the terminalalarms from terminal 1 to 9.16Screen: Images from the cameras will be dis-played on16-screen without switching thescreen.[Duration]Set the interval (duration) for switching cameraimages.3 s/ 5 s/ 10 sDefault: 5 sNote:The terminal status (N.O. or N.C.) for supplying an•alarm signal to the alarm terminal depends on thesettings for "Terminal input" of "Advanced termi-nal alarm setup" (☞ page 45).[Camera selection]Select the cameras to be included in the sequencedisplay.Mark the checkbox next to the desired camera. Theselected cameras will be displayed in numericalorder.Note:When "4-screen live sequence"• , "9-screen livesequence" or "16Screen" is selected for "Mode",images from the first 4, 9 or 16 selected cameraswill be displayed regardless of the order of thecamera number.[Secret view]Secret view is a function that causes the cameraimage displayed on a 1-screen or the selected cam-era image on a multiscreen on the main monitor to bedisplayed as a black screen on the sub monitor.Determine whether or not to use secret view.On: Enables the secret view function.Off: Disables the secret view function.Default: OffNote:While "1-screen live sequence" is being per-•formed, the secret view images will be skipped(not displayed).The image on the sub monitor may momentarily•go black when images are switched on the mainmonitor.
