39Set up recording/events [REC & event]The "REC & event" page has 3 tabs; the [Recording setup] tab, the [Event setup] tab and the [Advanced setup]tab.Recording setup tab [Recording setup]Configure the settings relating to schedule recording. Set the day(s), time table(s), frame rate and image qualityfor recording.■ SchedulesRecording will be performed according to the sched-ules set in advance. Select the day(s) of the week andthe time table(s).[Days to record]Select the day(s) of the week to record. Mark thecheckbox(es) of the day(s) of the week to record.[Schedule to record]3 time tables for schedule recording can be set up for"[Time table 1]". The time bar indicates 24 hours insteps of 15 minutes.Click the desired position on the time bar to desig-nate the start and end time. When the time is desig-nated, the time bar turns red.Note:At the default, schedule recording has been set•for 24 hours on Time table 1. To delete the desig-nated start and end time, right-click the timetable.The recording time table can be set by dragging•the start and end time on the time bar with themouse.Be sure to set so that there is no overlap between•the 3 time tables. When attempting to set thesame time as already set on another time bar, thetime immediately before or after the overlappingtime will be set.[Advanced >] buttonThe "Advanced schedule setup" page will be dis-played. In addition to 3 schedule recordings, 3 eventrecordings can be set up. The schedule settings canbe set up to 2 patterns. (☞ Page 40)■ Recording setup (All cameras)Set the recording frame rate and image quality. Thesettings will be applied to all cameras.[Frame rate]Select the recording frame rate.1 ips/ 3 ips/ 5 ips/ 10 ips/ 15 ips/ 30 ipsDefault: 10 ipsImportant:When the compression method of the camera is•MJPEG, 10 ips, 15 ips and 30 ips are unavailable.The default is "5 ips".[Image quality]Select the recording image quality.NQ (Normal): Standard qualityFQ (Fine): High qualitySF (Super Fine): Super fine qualityXF (Extra Fine): Extra fine qualityDefault: FQNote:If "XF" is selected when the compression method•of the camera is "MJPEG", "SF" will be setinstead of "XF".
