17Switch the image display area between a 1-screen and a multi-screenDisplay images on a 1-screen in the image display areaClick the desired area selection button.→ The selected area will be displayed on a 1-screen in the image display area. The image display area will beswitched to a 1-screen by clicking one of the area selection buttons when a multi-screen is displayed in the imagedisplay area.The area selection buttons will change as follows to indicate the current status.(a) : This area is displayed in the image display area and currently selected.(b) : This area is displayed in the image display area and currently not selected.(c) : This area is not displayed in the image display area, or currently being used for the sequential display.Display images on a multi-screen in the image display areaClick the desired multi-screen selection button.→ The selected multi-screen will be displayed in the image display area.(4-screen): Each time this button is clicked, the displayed area will change as follows.1 - 4 → 5 - 8 → 9 - 12 → 13 - 16 → 1 - 4 → ···(6-screen): Each time this button is clicked, the displayed area will change as follows.1 - 6 → 7 - 12 → 1 - 6 → 7 - 12···(9-screen): Areas 1 - 9 will be displayed in the image display area.(16-screen): Areas 1 - 16 will be displayed in the image display area.Check the status of the cameraThe status of the camera respective to the area can be check with the displayed icon.(No icon): Displaying of live images or playback of recorded images are available in this area.: Live images from the camera are being displayed in this area. When this icon is blinking, images in thesequential display are being displayed in this area.: Recorded images are being played in this area.Step 4Click the [OK] button.→ The connection status window will be displayed.When the connection is established, images from theselected camera will be displayed in the selectedarea in the image display area.
