27Control the camerasIt is possible to operate the camera while displaying images.Note:To control the camera, configure the settings such as the communication type between the camera and therecorder, protocol, etc. Refer to the installation guide of the recorder for how to configure the required settings ofthe recorder.Refer to the operating instructions of the camera for how to configure the required settings of the camera.Depending on the models of the connected cameras, it may be impossible to control the camera or some func-tions may be not available.Panning/tilting, zooming, focusing, preset position operationClick the buttons on the right side of the control panel to control the camera.Panning/tilting: Moves the camera horizontally (AB)/vertically (CD)Zooming: Zooms in/out of images (+: TELE, –: WIDE)Focusing: Adjusts the focus (+: FAR, –: NEAR)AF: Adjusts the focus automaticallyPreset position: Moves the camera to the preset position registered in advanceNotes:• When "Home" is selected for "Preset position", the camera will move to the home position (only when controllingPanasonic’s camera). Refer to the operating instructions of the camera for how to configure the related settings.• It is also possible to pan/tilt the camera by clicking on the image displayed in the image display area (only whendisplaying images from Panasonic's camera on a 1-screen or on a 4-screen). The camera moves to position theclicked point as the center point of its image.ZoomingPreset positionFocusing CDAB
