32Sequential displayThe displayed images from multiple cameras will be switched automatically.To start the sequential display, configure the settings relating to the sequential display in advance. Refer to page 52for how to configure the settings relating to the sequential display.Screenshot 1When clicking the [Sequential display] button, the pop-up menu will be displayed. Step 1Select "Normal Sequential Display" or "My FavoriteSequential Display".Important:When images are currently being displayed, discon-nect all the connections.When it is necessary to disconnect all the connec-tions to continue operation, the message window willbe displayed.Click the [OK] button to disconnect all the connec-tion to continue operation.Screenshot 2The password entry window will be displayed. Step 2The password registered when registered the recorderwill be entered automatically.Click the [OK] button.→ The sequential display will start.Step 3To stop the sequential display, click the [Stop sequentialdisplay] button. When the sequential display starts, the[Sequential display] button will change to the [Stopsequential display] button .Important:• When the alarm recording starts during the sequen-tial display, the sequential display will stop. Thesequential display will start when the alarm record-ing ends.• The sequential display will stop when an erroroccurs in the connection between the recorder andthe PC.• Other functions, such as the frame display andswitching of the image display area, are unavailableduring the sequence display.
