Panasonic WJ-SX150 Series Addendum

Also see for WVCU650 - SYSTEM CONTROLLER ADDENDUM: Product catalog Specifications Operating instructions Operating instructions

Contents

Panasonic WJ-SX150 Series Addendum Manual pdf 15 page image

15■ Resetting the Alarm InputsThere are two alarm reset functions:• Alarm reset (resetting the alarm inputs per monitor)• Alarm all reset (resetting all the alarm inputs)● Alarm Reset1. Select a monitor which displays "ALARM".2. To reset the alarms, press the ALM RESET/ALM ALLRESET button."ALARMnn" will disappear from the selected monitor.When alarms have been reset from all the monitors, theLCD display and indicators of system controllers willwork as follows for recovery.• The LCD display will return to the state before thealarm input.• The alarm indicator will go out.Note: When more than one alarm is input and they areassociated with the same monitor, they cannot be resetone by one.● Alarm All Reset1. Press the ALM RESET/ALM ALL RESET button whileholding down the SHIFT button.2. The monitor, the indicator, and the LCD display willchange as follows:• "ALARMnn" will disappear from all the monitor.• The LED display will return to the state before thealarm input.• The alarm indicator will go out.■ Suspending the Alarm InputsUse this function when you do not want to be disturbed byan alarm input, for example, during the setup procedures.1. Press the ALARM/ALM SUSPEND button while holdingdown the SHIFT button."ALM SUSPENDED" will appear on the monitor, and theALM SUSPEND indicator will light up.2. To cancel alarm suspension, press the ALARM/ALMSUSPEND button while holding down the SHIFT buttonagain."ALM SUSPENDED" will disappear from the monitor,and the ALM SUSPEND indicator will go out.Notes:• An alarm continues to operate even after it is suspend-ed.• If you suspend an alarm while an alarm image is dis-played, "ALM SUSPENDED" will not appear on the moni-tor. Reset the alarm, and then suspend it again.ALM SUSPENDED