Panasonic WJ-SX150 Series Addendum

Also see for WVCU650 - SYSTEM CONTROLLER ADDENDUM: Product catalog Specifications Operating instructions Operating instructions

Contents

Panasonic WJ-SX150 Series Addendum Manual pdf 8 page image

8■ Changing to Black and WhiteImagesThis function gets the clear camera images on the monitorwhile shooting the objects under low light conditions.1. Select the desired monitor and camera. (Refer to p. 3Monitor Selection and p. 3 Camera Selection.)2. Press the MENU button repeatedly until "BW Mode"appears on the LCD.3. Press the F1 button to change the image from the colormode to the BW (black and white) mode on the activemonitor.4. Press the F2 button to change the BW image to thecolor image on the active monitor.5. Press the MON (ESC) button to exit the mode.■ Camera Panning FunctionThere are three panning modes available as follows:sequence mode, sort mode, and auto pan. (Refer to theoperating instructions of matrix switcher.)1. Select the desired monitor and camera. (Refer to p. 3Monitor Selection and p. 3 Camera Selection.)2. Press the MENU button repeatedly until "Auto Mode"appears on the LCD.3. Press the assigned function button to activate the pan-ning function of the selected camera.The LCD will indicate the selected mode as follows.F1: "Seq" (Activates SEQUENCE PAN.)F2: "Sort" (Activates SORT PAN.)F3: "Pan" (Activates AUTO PAN.)Note: The AUTO MODE parameter, previously set inthe camera's SETUP MENU, will be automaticallyreplaced to the activated function parameter.4. To exit the mode, press the MON (ESC) button.BW Mode 010On Off Auto1 Auto2Auto Mode 009Seq Sort Pan Patrol