1175 Camera SetupThe following function requires the use of camerasequipped with the specific feature.1. Select the desired monitor and camera.Refer to the Monitor Selection and Camera Selection.2. Select the Camera Set Up (D4) Menu on the LCD dis-play by pressing the appropriate Direction button.Note: The default setting for the Camera Setup Menu isOn. Pressing the Function (F1) button at thismoment will allow access to the Camera Set upmenu if such access is authorized by the opera-tor's level.If “PROHIBITED” appears on the LCD display,press the MON (ESC) key to return the Camera SetUp Menu display.3. Press the Function (F1) button to gain access to theCamera Set Up Menu.The menu displayed may look as follows:F2 F3 F4Camera Set Up MenuOn ExitF1D44. Select the desired item parameter by moving theJoystick Controller UP and DOWN, and then select thedesired desired mode by moving the JoystickController LEFT and RIGHT.Press the CAM (SET) key to execute the setting orenter sub menu, and press the MON (ESC) key toescape from the setup mode or menu.5. Press the Function (F2) button to reset the selectedmenu, or press the Function (F3) button to reset all set-tings to factory default setting.Refer to the Operating Instructions of the selected cam-era for further details.Note6. Press the Function (F4) button to return to the originalscreen.Caution: If camera setup is started with buttons on thecamera, all settings must be made with the buttonson the camera's.If camera setup is started with a Matrix Switcher, allsettings must be made with the Matrix Switcher.** SET UP **CAMERA ID OFFALC/ELC ALCSHUTTER OFFAGC ONSENSE UP OFFSYNC INTWHITE BAL ATWWIDE D-RANGE OFFMOTION DET OFFDNR OFFEND SET UP ENABLECamera Set Up MenuRes A.Res ExitF1 F2 F3 F4

operating instructions

monitor selection

camera selection

tour sequence

group sequence

alarm recall

operator registration

system status display

cpu board

front view

connection with the camera sites

connection with the system controllers

setup menu

level table

camera title

system menu

controlling camera site accessories

patrol learn and play

camera setup

alarm operation

priority lock

Panasonic WJ-SX550C Operating Instructions Manual

WVCU550C - SYSTEM CONTROLLER UNIT

system controller

IMPORTANT SAFETY INSTRUCTIONS

PREFACE

PRECAUTIONS

MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS

INSTALLATION

SYSTEM INFORMATION

SPECIFICATIONS

WJSX550C - MATRIX SWITCHER