131 SequenceThis system has three kinds of sequential modes: Program, Tour and Group Program SequenceThe Program Sequence is a series of 64 steps assigned to a particular monitor.Each step has a Camera and Dwell Time assigned to it.In the Program Sequence, each monitor has its own specified sequence operation as shown below.• Auto Skip FunctionThe Auto Skip function is available in sequence mode. If there is no video signal present at a step, the sequence will auto-matically skip that step.This function is enabled from the Set Up Menu.• Dwell TimeThe amount of time each camera view is displayed on the monitor (Dwell Time) can be set from 1 second to 30 seconds in1-second increments.This function is set from the Set Up Menu.External Timing, which is controlled from the Time Lapse VCR, can also be selected from the Set Up Menu.Monitor 1Dwell time: 3 sec.Step 1Monitor 1Dwell time: 3 sec.Step 2Monitor 1Dwell time: 3 sec.Step 3Monitor 1Dwell time: 3 sec.Step 4Monitor 1Dwell time: 3 sec.Step 5s s s ss Tour SequenceA Tour Sequence consists of 64 steps.Each step has a Camera, Dwell Time, Auxiliary Control and Pan/Tilt Preset assigned to it.A total of 32 Tour Sequences can be programmed on the Set Up Menu.A Tour can be assigned to any monitor.Monitor 1Dwell time: 5 sec.Step 1Monitor 1Dwell time: 3 sec.Step 2Monitor 1Dwell time: 10 sec.Step 3Monitor 1Dwell time: 5 sec.Step 4Monitor 1Dwell time: 3 sec.Step 5s s s ssT1 T2 T3 T4 T5 T6 T7 T8T9 T10 T11 T12 T13 T14 T15 T16T17 T18 T19 T20 T21 T22 T23 T24T25 T26 T27 T28 T29 T30 T31 T32Tour Sequence32 Tours to Any MonitorMonitor 1Monitor 2Monitor 3Monitor 4Monitor 15Monitor 16

operating instructions

monitor selection

camera selection

tour sequence

group sequence

alarm recall

operator registration

system status display

cpu board

front view

connection with the camera sites

connection with the system controllers

setup menu

level table

camera title

system menu

controlling camera site accessories

patrol learn and play

camera setup

alarm operation

priority lock

Panasonic WJ-SX550C Operating Instructions Manual

WVCU550C - SYSTEM CONTROLLER UNIT

system controller

IMPORTANT SAFETY INSTRUCTIONS

PREFACE

PRECAUTIONS

MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS

INSTALLATION

SYSTEM INFORMATION

SPECIFICATIONS

WJSX550C - MATRIX SWITCHER