Panasonic WORKIO DP-CL21 Network Manual

Also see for DP-CL21M: User guide

Contents

Settings and Printing NetworkNetworkMaintenance and Spec.Setup in NetWare124[C] Using NDPS - Novell Gateway (NetWare 5.x / NetWare 6 only)NDPS Manager and NDPS Broker must be created before proceeding the following steps. To use thismethod, the TCP/IP communication must be enabled between the server and the printer.For LPR on IP, see below. For RPRINTER on IPX, see page 126.[For LPR on IP]1 Start the server system.2 Start the client system and log on the network in the NDS mode.3 Double click nwadmn32.EXE to display the NetWare Administrator window.4 With the container object highlighted, click Create... from the Object menu.The New Object window is displayed.5 Select NDPS Printer from the Class of new object box, then click [OK].The Create NDPS Printer window is displayed.6 Enter a printer name (for example: DP-CL21M) in the NDPS Printer Name box,click on the Create a New Printer Agent check box and click [Create].The Create Printer Agent window is displayed.7 Click on [Ö] to the right of the NDPS Manager Name box; highlight the NDPSManager object in the left window, and then click [OK].8 Make sure that Novell Printer Gateway is selected within the Gateway Typeswindow, and then click [OK].The Configure Novell PDS for Printer Agent window is displayed.9 Select [NONE] from the Printer Type box, Novell Port Handler from the PortHandler Type box, and then click [OK].The Configure Port Handler for Printer Agent window is displayed.10 Click on Remote [LPR on IP] check button from the Connection Type, andthen click [Next>].The Configure Port Handler for Printer Agent window is displayed.