Panasonic WV-CP500 Operating Instructions Manual

Also see for WV-CP500 series: Product catalog Product catalog Installation guide Specification Installation guide

Contents

Panasonic WV-CP500 Operating Instructions Manual Manual pdf 14 page image

14Manual fine adjustment of white balanceThe white balance is manually fine adjusted after white balance automatically adjustment in the automatic color temperaturetracking mode (ATW1, ATW2) or automatic white balance control mode (AWC).Follow the procedure below.Step 1Set "WHITE BAL" to "ATW1", "ATW2" or "AWC" and press the setting button.→ The fine adjustment screen appears.Step 2Move the cursor to "R" and "B" and use the right or left button to fine adjust the level for each.When the level indicator moves in the "+" direction, the color becomes deeper, and when the level indicator moves in the "–"direction, the color becomes lighter.7. Digital noise reduction function setting [DNR]The digital noise reduction function reduces noise automatically under the condition of low illuminance.The effect level of the noise reduction function is selectable from the following:LOW: Low level of noise reduction (small residual image).HIGH (default): High level of noise reduction (large residual image).8. Black-and-white mode setting [BW MODE]The settings relating to the black-and-white mode can be configured. Follow the procedure below.Important:• When "BW" is set for "ALARM IN", the "EXT" indication will be displayed for "BM MODE" and it is impossible to change thesetting. (+ Page 23)**CAMERA SETUP**SCENE1ALC/ELC ALCSHUTTER OFFAGC ON(HIGH)SENS UP OFFWHITE BAL ATW1DNR HIGHBW MODE AUTO1i-VMDRET TOP END"BW MODE" screen"CAMERA SETUP" screen**BW MODE**(1)AUTO1LEVEL HIGHDURATION TIME .|..S LBURST(BW) ONRET TOP END**CAMERA SETUP**SCENE1ALC/ELC ALCSHUTTER OFFAGC ON(HIGH)SENS UP OFFWHITE BAL ATW1DNR HIGHBW MODE AUTO1i-VMDRET TOP ENDFine adjustment screen"CAMERA SETUP" screen**ATW1**(1)R ...|... 0- +B ...|... 0- +RET TOP END