Panasonic WV-CP500 Operating Instructions Manual

Also see for WV-CP500 series: Product catalog Product catalog Installation guide Specification Installation guide

Contents

Panasonic WV-CP500 Operating Instructions Manual Manual pdf 18 page image

18Perform the settings relating to the detection of appearance/disappearance of stationary objectsPerform the settings relating to the detection of appearance/disappearance of stationary objects as follows. Up to 4 appearanc-es/disappearances of stationary objects can be simultaneously detected. However, use of the scene change detection functiondecreases the maximum simultaneous detectable appearances/disappearances of stationary objects to 3.Follow the procedure below.Step 1Move the cursor to "i-VMD" and press the setting button.→ The "i-VMD SETUP" screen appears.Step 2Move the cursor to "OBJECT DET" and press the setting button.→ The "OBJECT DET" screen appears.Step 3Move the cursor to "DURATION TIME" and select the wait time of appearance/disappearance of stationary objects from the fol-lowing.10 s (default)/20 s/30 s/40 sStep 4Move the cursor to "AREA" and select the area for which the detection of appearance/disappearance of stationary objects is tobe set.ALL (default): All areas will be set as the detection area.SETUP: When the setting button is pressed after selecting "SETUP", up to 2 areas can be set as the detection area. Refer topages 18 for how to configure the settings.Step 5Move the cursor to "SENSITIVITY" and press the setting button.→ The "SENSITIVITY" screen appears.Step 6Move the cursor to "MIN SIZE" and select the minimum size of objects detected from the following: The size options will be dis-played in a green frame in the center of the screen. In "OFF" position, any object will be detected regardless of its size.Perform the setup while viewing the detection result displayed on the screen.OFF (default)/SMALL/MEDIUM/LARGENote:• The detection areas set in step 4 will be displayed as a white frame on the "SENSITIVITY" screen.• When appearance/disappearance of a stationary object is detected, a red frame will be displayed on the "SENSITIVITY"screen.**CAMERA SETUP**SCENE1ALC/ELC ALCSHUTTER OFFAGC ON(HIGH)SENS UP OFFWHITE BAL ATW1DNR HIGHBW MODE AUTO1i-VMDRET TOP END"i-VMD SETUP" screen "OBJECT" screen "SENSITIVITY" screen"CAMERA SETUP" screen**i-VMD SETUP**(1)MOTION DETOBJECT DET ONSCENE CHANGE OFFINDICATOR OFFALARM CONTRET TOP END**SENSITIVITY**(1)MIN SIZE OFFRET TOP END**OBJECT DET**(1)REMOVAL AND LEFT BEHINDDURATION TIME 10sAREA ALLSENSITIVITYRET TOP END