Panasonic WV-CP500 Operating Instructions Manual

Also see for WV-CP500 series: Product catalog Product catalog Installation guide Specification Installation guide

Contents

Panasonic WV-CP500 Operating Instructions Manual Manual pdf 24 page image

24Configure the settings relating to the alarm output terminalSelect the alarm output operation. Follow the procedure below.Step 1Move the cursor to "ALARM IN/OUT" and press the setting button.→ The "ALARM IN/OUT" screen appears.Step 2Move the cursor to "ALARM OUT" and select the alarm output terminal operation from the following.OFF (default): Does not perform terminal output.ALARM: The alarm output will be performed upon a i-VMD detection. The alarm output will also be performed when receivingan alarm input while operation with setting "ALARM" for "ALARM IN".BW: Activates the output terminal while an image is displayed in the black and white mode.12. Privacy zone setting [PRIVACY ZONE]When undesired portions in the camera shooting area (on the screen) exist, those portions (privacy zone) are hidden. Up to 8portions can be specified for the privacy zone.ON (1): Grays the zone.ON (2): Mosaics the zone.OFF (default): Displays the zone normally.Follow the procedure below.Note:• The privacy zone function is disabled at initializing the unit, i.e. right after turning on the power.Step 1Move the cursor to "PRIVACY ZONE", select "ON (1)" or "ON (2)", and press the setting button.→ The zone setting screen appears.**SYSTEM SETUP**SYNC INTALARM IN/OUTPRIVACY ZONE OFFSTABILIZER OFFEL-ZOOM OFFRET TOP END"ALARM IN/OUT" screen"SYSTEM SETUP" screen**ALARM IN/OUT**ALARM IN OFFALARM OUT OFFRET TOP END**SYSTEM SETUP**SYNC INTALARM IN/OUTPRIVACY ZONE ON(1)STABILIZER OFFEL-ZOOM OFFRET TOP END"SYSTEM SETUP" screen Zone setting screen**ZONE NUMBER 1 /8**POSITION PUSH SWUPPER LEFTDELRET TOP END