Panasonic WV-CP500 Operating Instructions Manual

Also see for WV-CP500 series: Product catalog Product catalog Installation guide Specification Installation guide

Contents

Panasonic WV-CP500 Operating Instructions Manual Manual pdf 8 page image

8Camera operation setting [CAMERA SETUP]The following describes the camera operation settings. The following settings can be configured on the "CAMERA SETUP"screen displayed from the top screen.Refer to page 5 for how to call up the screen.The settings configured on the "CAMERA SETUP" screen will be saved as a scene file.1. Register a scene file [SCENE1/SCENE2]It is possible to register 2 patterns of scene file. For example, when different settings are to be applied between day and night,SCENE1 can be applied in the daytime and SCENE2 at night.Change between the scene files can be made on the ALARM IN setting or shortcut operation. (+ Pages 23 and 24)"SCENE1" is set as the default setting.Step 1After confirming that "SCENE1" is selected, configure the settings of "ALC/ELC" through "i-VMD". (☞ Pages 9 - 20)When using while changing the scene files, go to step 2.Step 2Move the cursor to "SCENE1" and use the right or left button to select "SCENE2".→ The "COPY(SCENE1)" screen will be displayed.Step 3To configure the settings of "SCENE2" using the settings of "SCENE1", press the setting button after moving the cursor to"COPY(SCENE1)".→ The settings of "SCENE1" will be copied to "SCENE2".Step 4Edit the settings to be changed and saved as the settings of "SCENE2".The number displayed at the right side of the title on each setting screeninidicates a scene file number.**CAMERA SETUP**SCENE1ALC/ELC ALCSHUTTER OFFAGC ON(HIGH)SENS UP OFFWHITE BAL ATW1DNR HIGHBW MODE AUTO1i-VMDRET TOP ENDqwertyuio"CAMERA SETUP" screenScreen when "SCENE1" is selected Screen when "SCENE2" is selected**CAMERA SETUP**SCENE1ALC/ELC ALCSHUTTER OFFAGC ON(HIGH)SENS UP OFFWHITE BAL ATW1DNR HIGHBW MODE AUTO1i-VMDRET TOP END**CAMERA SETUP**SCENE2ALC/ELC ALCSHUTTER OFFAGC ON(HIGH)SENS UP OFFWHITE BAL ATW1DNR HIGHBW MODE AUTO1i-VMDCOPY(SCENE1)RET TOP END**ALC CONT**(1)BACK LIGHT COMPSUPER-D5 ONLEVEL ...|... 0- +MANUAL ABSRET TOP ENDScene filenumber