15 Preset Preset Menu Display1. Displaying the preset menu directly(1) Move the cursor to PRESET 1 and move the joystick to the leftor right to select the position number to be set.(2) Press the CAM (SET) key.The preset setting menu appears on the monitor screen.2. Displaying the preset menu from the PRESET NUMBER SET menu(1) Move the cursor to MAP and press the CAM (SET) key.The PRESET NUMBER SET menu appears on the monitorscreen.(2) Move the cursor to the position number to be set and pressthe CAM (SET) key.The preset setting menu appears on the monitor screen. Todisplay position number 33-64, move the cursor to “33-64” inthe lower left of the screen and press the CAM (SET) key.Notes:• The * mark means the position number is preset.• The character H means home position.• On the second bottom line the preset ID is displayed respec-tive to the selected number. “DOOR” after “ID:” is for presetposition numbers 1 in the example shown above.• Preset numbers 1 through 4 are linked to alarm inputs 1through 4. If alarm input 1 comes in, the camera turns to pre-set position 1, or to other positions according to alarm input 2,3 or 4.• The PRESET NUMBER SET menu indicates the 8 preset posi-tions (1 - 8) for the WV-CS554 combination camera.*** SET UP MENU ***PRESET 1*MAPHOME POSITIONSELF RETURNAUTO MODEAUTO PAN KEYDIGITAL FLIPLOCAL/REMOTESPECIAL1CAMERARS485 SET UP1510MINOFFAUTO PANOFFLOCALSetup menu** PRESET NUMBER SET **261014182226301*591317212529ID:DOOR33-64 RET3711151923273148121620242832PRESET NUMBER SET menu(1-32)** PRESET NUMBER SET **34384246505458623337414549535761ID:1-32 RET35394347515559633640444852566064PRESET NUMBER SET menu(33-64) Position Setting1. Move the cursor to POSITION SET on the preset setting menu andpress the CAM (SET) key.The position setting menu is displayed.2. To set panning/tilting positions(1) Move the cursor to PUSH SET next to PAN/TILT and press theCAM (SET) key. The PAN/TILT setting menu appears.(2) Select panning/tilting positions by moving the joystick up anddown, right and left, and press the CAM (SET) key.The positions are set and the screen returns to the positionsetting menu.PRESET NO. 1*POSITION SETPRESET IDALC/MANUALDWELL TIMESCENE FILEPRESET SPEEDRET DELONALC10SOFF••••|••••L HPreset setting menu→PUSH SET→PUSH SET** POSITION 1 **PAN/TILTZOOM/FOCUSPAN OFFSET SET ← −10.0 →RETFLOOR1DOORPosition setting menu→PUSH SET→PUSH SET** POSITION 1 **PAN/TILTZOOM/FOCUSU TILT D/L PAN RRETFLOOR1DOOR*** SET UP MENU ***PRESET 1*MAPHOME POSITIONSELF RETURNAUTO MODEAUTO PAN KEYDIGITAL FLIPLOCAL/REMOTESPECIAL1CAMERARS485 SET UP1510MINOFFAUTO PANOFFLOCALSetup menuPAN/TILT setting menu