9 Setup Menu Description PRESET(1) Position (POSITION SET)POSITION SET adjusts the camera picture by panning, tilting, zooming and focusing.See page 15 for the setting.(2) Preset Identification (PRESET ID)A preset ID (identification of up to 16 alphanumeric characters) can be displayed on the screen.See page 16 for the setting.(3) Light Control (ALC/MANUAL)ALC/MANUAL refers to the mode of the incoming light level control.See page 18 for the setting.(4) Dwell Time (DWELL TIME)DWELL TIME is the duration that the picture of each camera position is displayed. You can select apreset duration from the menu.See page 19 for the setting.(5) Scene File (SCENE FILE)SCENE FILE stores up to 10 files. Each file has a set of detailed parameters for Shutter Speed, AGC,Electronic Sensitivity Enhancement, White Balance, Motion Detector and AF mode. The scene filescan be recalled later to reproduce the parameter settings under the same conditions as stored in thefiles.See page 19 for the setting. Home Position (HOME POSITION)HOME POSITION is the camera’s basic position. It returns to this position automatically, when a specifictime has elapsed after a manual operation. This setting works only when AUTO MODE is OFF.See page 20 for the setting. Self Return (SELF RETURN)SELF RETURN is the time-out parameter for returning to the home position. The camera returns to AUTOMODE if it is set to ON when a specific time has elapsed after a manual operation.See page 20 for the setting. AUTO MODEAUTO MODE is for setting the movement of the camera. You can select one from the three automaticoperation modes and one manual operation mode as follows:OFF mode: No automatic operation. The camera can be operated only manually.SEQ mode: The camera operates in the sequence of preset positions in numerical order.SORT mode: The camera operates in the sequence of preset positions counterclockwise from Pan/TiltStarting Point.AUTO PAN mode: The camera automatically turns within the preset panning range.See page 21 for the setting.