19 Scene File Setting1. To set a scene file numberMove the cursor to SCENE FILE and select a scene file number (1to 10, or OFF) by moving the joystick to the left or right. No scenefile is selected at OFF.2. To set scene file detailsMove the cursor to a scene file number and press the CAM (SET)key. The setting menu appears.See the pages below for the setting.Shutter speed: Page 35.AGC: Page 35.Electronic sensitivity enhancement: Page 35.White balance: Page 37.Motion detector: Page 39.Auto focus: Page 40.** SCENE FILE 1 **SHUTTERAGCSENS UPWHITE BALMOTION DETAF MODERETOFFONOFFATWONMANUAL SScene file setting menu** SCENE FILE 1 **SHUTTERAGCWHITE BALAF MODERETOFFONATWMANUAL SScene file setting menuPRESET NO. 1*POSITION SETPRESET IDALC/MANUALDWELL TIMESCENE FILEPRESET SPEEDRET DELONALC10S1••••|••••L HPreset setting menu To return to the PRESET NUMBER SET Menu• Move the cursor to RET and press the CAM (SET) key. The PRE-SET NUMBER SET menu appears with the * mark on the right ofthe preset position number. To return to the setup menu• Move the cursor to RET and press the CAM (SET) key. ** PRESET NUMBER SET **261014182226301*591317212529ID:DOOR33-64 RET3711151923273148121620242832PRESET NUMBER SET menu Preset Speed• Move the cursor to PRESET SPEED and select a speed by movingthe joystick to the left or right.PRESET NO. 1*POSITION SETPRESET IDALC/MANUALDWELL TIMESCENE FILEPRESET SPEEDRET DELONALC10SOFF••••|••••L HPreset setting menu Dwell Time Setting• Move the cursor to DWELL TIME and set a dwell time by movingthe joystick to the left or right. Dwell time changes as follows:The letter S signifies second(s) and MIN minute(s).PRESET NO. 1*POSITION SETPRESET IDALC/MANUALDWELL TIMESCENE FILEPRESET SPEEDRET DELONALC10SOFF••••|••••L HPreset setting menu2S 3S 5S 10S 30S 1MIN 2MIN 3MIN 4MIN