Panasonic WV-CS570/G Operating Instructions Manual

Contents

Panasonic WV-CS570/G Operating Instructions Manual Manual pdf 34 page image

Password Lock (PASSWORD LOCK)Caution:For security, do not operate your VTR for recordingwhile the password menus are displayed on themonitor.A 3-digit number is used for a password to limitaccess to all settings.1. Move the cursor to PASSWORD LOCK, then selectON or OFF with the joystick.Note:ON or OFF can be selected only after goingthrough the password verification.OFF: You can change all settings.ON: You cannot change settings at all nor operateAUTO PAN, SEQ, SORT, and PATROL.2. Press the CAM (SET) button.Password Verification3. The password verification menu appears.3-1 Select a numeral for the first digit with the joy-stick, and press the CAM (SET) button. Thoughthe entered password is not displayed, the up-arrow moves one character to the right.3-2 Repeat the above step for the 2nd and 3rd dig-its.Default: 1233-3 The cursor moves to OK after all the three digitshave been entered. Unless you want to changethe password, press the CAM (SET) button.If the correct password is entered, the screenreturns to SET UP MENU. ON and OFF settingsare the same as made on the SET UP MENUmenu is as set in step 1.If a wrong password is entered, the screenreturns to the verification menu. Repeat steps 3-1to 3-3 to verify the password.** SET UP MENU **PRESET 1MAPHOME POSITIONSELF RETURNAUTO MODEAUTO PAN KEYDIGITAL FLIPSPECIAL1CAMERARS485 SET UPPASSWORD LOCK ONOFFOFFOFFAUTO PANON** PASSWORD? **0 1 2 3 4 5 6 7 8 9. . .↑OK RESETNEW PASSWORDRET-34-AUTO PAN: Assigns the auto panning function tothe button.SEQ: Assigns the SEQUENCE function to the but-ton.SORT: Assigns the SORT function to the button.PATROL: Assigns the PATROL PLAY function to thebutton.Note:AUTO PAN LED on the controller does not light ifsomething other than AUTO PAN is assigned.AUTO PAN does not stop with the AUTO PANbutton.If PASSWORD LOCK is set to ON, you cannotoperate AUTO PAN, SEQ, SORT, and PATROLeven by pressing the AUTO button. Digital Flip Setting (DIGITAL FLIP)Move the cursor to DIGITAL FLIP and select ON or OFFwith the joystick.OFF: The tilt range is limited from 0 ° to 90 °.ON: The digital flip function allows the tilt angle towiden up to 180 °. The image on the monitorscreen is flipped horizontally and vertically at thetilt angle of approx. 135 ° (If the camera isinstalled on a ceiling).Note:The tilt range narrows from 0 ° to 90 ° if PANLIMIT is set to ON.Notes:• Digital flip functions while moving the joystick down-wards. In case of moving the joystick to other direc-tions, it does not function.• When OFF is selected for DIGITAL FLIP, the follow-ing operations are required to move the camera180 ° vertically.1) Move the joystick downwards to aim the cameradown.2) Move the joystick to the right or left to rotate thecamera 180 ° horizontally.3) Move the joystick upwards.• To set the preset position directly from WV-CU360System Controller, it is temporarily required to setboth the electronic zoom function and digital flipfunction to OFF.Tilt range setting is disabled between 90 ° and 185 °.** SET UP MENU **PRESET 1MAPHOME POSITIONSELF RETURNAUTO MODEAUTO PAN KEYDIGITAL FLIPSPECIAL1CAMERARS485 SET UPPASSWORD LOCK OFFOFFOFFOFFAUTO PANON