Panasonic WV-CS570/G Operating Instructions Manual

Contents

Panasonic WV-CS570/G Operating Instructions Manual Manual pdf 54 page image

-54-SHORTCUTSShortcuts are supported when you are using the system controller that has a CAM FUNCTION button. With shortcuts,you can configure camera functions by inputting function codes on the 10-key pad and then pressing the CAMFUNCTION button.The following is a list of all of the shortcuts that are supported by this camera. In addition, you can also move the cam-era to a preset position by inputting the applicable position number on the 10-key pad.Notes:• Turn off digital flip before registering preset positions. If NO REGS.; FLIP ON appears, do the setting again.• Shortcuts may not be performed if they are executed while a pan, tilt, zoom, or focus operation is in progress.• Shortcuts 1 through 32, 169, 170 can be saved as part of a patrol routine.• Except for shortcuts 169 and 170, executing any shortcut during patrol routine PLAY will cause the PLAY operationto stop.Controller Operation Setting[6] + [5] + [CAM FUNCTION] AUTO PAN ON[6] + [6] + [CAM FUNCTION] AUTO PAN OFF[6] + [7] + [CAM FUNCTION] Increases AUTO PAN speed one step.[6] + [8] + [CAM FUNCTION] Decreases AUTO PAN speed one step.[6] + [9] + [CAM FUNCTION] Sets AUTO PAN start point.[7] + [0] + [CAM FUNCTION] Sets AUTO PAN end point.[7] + [1] + [CAM FUNCTION] AUTO MODE: OFF[7] + [2] + [CAM FUNCTION] AUTO MODE: SEQ ON[7] + [3] + [CAM FUNCTION] AUTO MODE: SORT ON[7] + [4] + [CAM FUNCTION] Reverses AUTO PAN range.[7] + [6] + [CAM FUNCTION] ENDLESS: ON[7] + [7] + [CAM FUNCTION] ENDLESS: OFF[7] + [8] + [CAM FUNCTION] DIGITAL FLIP: ON[7] + [9] + [CAM FUNCTION] DIGITAL FLIP: OFF[8] + [0] + [CAM FUNCTION] PROPO.P/T: ON[8] + [1] + [CAM FUNCTION] PROPO.P/T: OFF[8] + [4] + [CAM FUNCTION] BLC: ON[8] + [5] + [CAM FUNCTION] BLC: OFF[8] + [6] + [CAM FUNCTION] AF MODE: AUTO[8] + [7] + [CAM FUNCTION] AF MODE: MANUAL[8] + [8] + [CAM FUNCTION] Performs auto focus.[8] + [9] + [CAM FUNCTION] Moves to home position.[9] + [3] + [CAM FUNCTION] CAMERA ID: ON[9] + [4] + [CAM FUNCTION] CAMERA ID: OFF[9] + [5] + [CAM FUNCTION] AREA TITLE: ON (NESW)[9] + [6] + [CAM FUNCTION] AREA TITLE: ON (USER)[9] + [7] + [CAM FUNCTION] AREA TITLE: OFF[1] + [0] + [0] + [CAM FUNCTION] Adjusts camera position (REFRESH)[1] + [0] + [1] + [CAM FUNCTION] Stores preset to first available preset number (1 to 32).[1] + [3] + [2] + [CAM FUNCTION][1] + [6] + [5] + [CAM FUNCTION] PATROL: PLAY[1] + [6] + [6] + [CAM FUNCTION] PATROL: STOP[1] + [6] + [7] + [CAM FUNCTION] PATROL: LEARN start[1] + [6] + [9] + [CAM FUNCTION] IRIS: OPEN